8 material differences · fewer than 12
Tractor oneSOMECA 440 (TD)1982No measured PTO figureTractor twoZETOR 50111980–1984No measured PTO figure
Which should you choose?
Read our verdict on the 440 (TD) and the 5011 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 440 (TD) | 5011 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | FIAT-IVECO 8035.02 | ZBROJORKA Z-5001 | differs |
| Displacement declared | 2.59 L | 2.70 L | — |
| Maximum torque declared | 114 lb·ft · 154 N·m | 108 lb·ft · 147 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry FEREDO double clutch | Pedal-operated dry Zbrojovka double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.1 gpm · 26.8 L/min | 6.2 gpm · 23.3 L/min | +15% 440 (TD) |
| Pressure declared | 2,843 psi · 196 bar | 3,046 psi · 210 bar | +7% 5011 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,189 lb · 1,900 kg | 5,886 lb · 2,670 kg | +41% 5011 |
| Wheelbase declared | 76.8 in · 1,950 mm | 79.7 in · 2,025 mm | — |
| Length declared | 126.8 in · 3,220 mm | 132.9 in · 3,375 mm | — |
| Width declared | 65.0 in · 1,650 mm | 71.3 in · 1,810 mm | +10% 5011 |
| Ground clearance declared | 13.8 in · 350 mm | 17.3 in · 440 mm | +26% 5011 |
| Turning radius, braked declared | 9.7 ft · 2.95 m | 10.1 ft · 3.09 m | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 49.7 qt · 47.0 L | +15% 440 (TD) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA 440 (TD) sources
- Source: Traktorenlexikon, “Someca 440”
ZETOR 5011 sources
- Source: Traktorenlexikon, “Zetor 5011”