- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 2008–2012
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
New Holland T-4040 specs: hp, weight, years
IVECO F4 CE 9484 N (Tier-III) four-cylinder diesel. The manufacturer claimed 84.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
84.9 hp
63.3 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “New Holland T 4040”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 8,278 lb
- 3-point lift
- 6,393 lb
- Hyd. flow
- 16.9 gpm
- Top speed
- 18.6–24.9 mph
New Holland T-4040 specs: key facts
The New Holland T-4040 was built from 2008 to 2012.
The New Holland T-4040 has a claimed engine power (gross or net not stated) of 63.3 kW (84.9 hp); it has no measured PTO figure.
The New Holland T-4040 is four-wheel drive (4WD).
The New Holland T-4040 has a IVECO F4 CE 9484 N (Tier-III) engine, a 4-cylinder 4.49 L diesel unit.
The New Holland T-4040 weighs 3,755 kg (8,278 lb) unladen.
The New Holland T-4040 has a rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the New Holland T-4040 lifts 2,900 kg (6,393 lb) at the lower-link ends.
The hydraulic pump of the New Holland T-4040 delivers 63.8 L/min (16.9 gpm).
Source · Traktorenlexikon, “New Holland T 4040”
How does the T-4040 compare with its class?
- Strength:
A maximum engine torque of 373 N·m is high for its class — 20% above the median of 310 N·m across the 313 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 370 comparable records. How we work this out
How much horsepower does a T-4040 have?
The only figure for the T-4040 is 84.9 hp (63.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “New Holland T 4040”
What engine is in a T-4040?
A T-4040 has an IVECO F4 CE 9484 N (Tier-III), a 4-cylinder 4.49 L diesel engine.
| Make & model | IVECO F4 CE 9484 N (Tier-III) |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 273.7 ci · 4.49 L |
| Max torque | 275 lb·ft · 373 N·m @ 1,000 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “New Holland T 4040”
How much will a T-4040 lift, and what is its hydraulic flow?
A T-4040 lifts 6,393 lb (2,900 kg) at the lower-link ends.
| Pump flow | 16.9 gpm · 63.8 L/min |
|---|---|
| Pressure | 3,263 psi · 225 bar |
| Lift at ends | 6,393 lb · 2,900 kg |
| Rear PTO | 540 rpm / 1000 rpm @ 2,196 engine rpm |
| PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 parts |
Source · Traktorenlexikon, “New Holland T 4040”
What transmission does a T-4040 have?
Transmission specifications for the T-4040 are below.
| Clutch | Dry LuK double clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “New Holland T 4040”
How much does a T-4040 weigh?
A T-4040 weighs 8,278 lb (3,755 kg) unladen.
| Unladen weight | 8,278 lb · 3,755 kg |
|---|---|
| Maximum permissible mass | 11,574 lb · 5,250 kg |
| Wheelbase | 86.0 in · 2,185 mm |
| Length | 146.6 in · 3,724 mm |
| Width | 73.5–95.6 in · 1,867–2,428 mm |
| Height | 92.1 in · 2,340 mm |
| Ground clearance | 15.0 in · 380 mm |
| Front track | 48.7–76.6 in · 1,236–1,945 mm |
| Rear track | 48.5–76.7 in · 1,232–1,949 mm |
Source · Traktorenlexikon, “New Holland T 4040”
What oil does a T-4040 take, and how much?
A T-4040 engine takes 7.9 qt (7.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.9 qt · 7.5 LSource: Traktorenlexikon, “New Holland T 4040” · single source, not independently verified |
| Transmission & hydraulic | 44.4 qt · 42.0 LSource: Traktorenlexikon, “New Holland T 4040” · single source, not independently verified |
| Front axle | 1.3 qt · 1.25 LSource: Traktorenlexikon, “New Holland T 4040” · single source, not independently verified |
| Cooling system | 12.7 qt · 12.0 LSource: Traktorenlexikon, “New Holland T 4040” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a T-4040?
Within 10% of its 84.9 hp of claimed engine power, the same type, and first built within 15 years of it.
- New Holland T 504084.9 hp engine, claimed · 2008–2012Side by side with the T-4040 →
- AGCO-ALLIS 876584.9 hp engine, claimed · 1998–1999Side by side with the T-4040 →
- Case-IH CS-86 (A)84.9 hp engine, claimed · 1995–2003Side by side with the T-4040 →
- Case-Steyr M 9086a84.9 hp engine, claimed · 1995–2003Side by side with the T-4040 →
- Steyr 9086 (a)84.9 hp engine, claimed · 1993–1995Side by side with the T-4040 →
- New Holland T4.7584 hp engine, claimed · from 2011Side by side with the T-4040 →
Common questions about the New Holland T-4040
Is a T-4040 two-wheel drive or four-wheel drive?
The New Holland T-4040 is four-wheel drive (4WD).
What PTO does a T-4040 have?
A T-4040 has a 540 rpm / 1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 parts shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “New Holland T 4040”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: New Holland T 4040 — CC BY-SA 4.0, WIKIBOOKS-TL-111387 · revision 993213. Wikibooks contributors (Traktorenlexikon). Original document