10 material differences · fewer than 12

Tractor oneAGCO-ALLIS 87651998–1999No measured PTO figureTractor twoNew Holland T-40402008–2012No measured PTO figure

Which should you choose?

Read our verdict on the 8765 and the T-4040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8765 and New Holland T-4040, field by field
Field	8765	T-4040	Gap
Engine
Engine power, claimed claimed	84.9 hp	84.9 hp	—
Engine declared	SISU-DIESEL 444 Y	IVECO F4 CE 9484 N (Tier-III)	differs
Displacement declared	—	4.49 L	—
Maximum torque declared	—	275 lb·ft · 373 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-cooled wet multi-disc clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	16.9 gpm · 63.8 L/min	—
Pressure declared	3,046 psi · 210 bar	3,263 psi · 225 bar	+7% T-4040
Three-point lift, at the coupling points declared	5,732 lb · 2,600 kg	6,393 lb · 2,900 kg	+12% T-4040
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,616 lb · 3,908 kg	8,278 lb · 3,755 kg	—
Maximum permissible mass declared	—	11,574 lb · 5,250 kg	—
Wheelbase declared	96.0 in · 2,438 mm	86.0 in · 2,185 mm	+12% 8765
Length declared	161.0 in · 4,089 mm	146.6 in · 3,724 mm	+10% 8765
Width declared	78.0 in · 1,981 mm	73.5–95.6 in · 1,867–2,428 mm	differs
Height, over the cab declared	103.0 in · 2,616 mm	92.1 in · 2,340 mm	+12% 8765
Ground clearance declared	—	15.0 in · 380 mm	—
Fuel tank declared	147.9 qt · 140.0 L	93.0 qt · 88.0 L	+59% 8765

Source

Source