12 material differences

Tractor oneCase-IH CS-86 (A)1995–2003No measured PTO figureTractor twoNew Holland T-40402008–2012No measured PTO figure

Which should you choose?

Read our verdict on the CS-86 (A) and the T-4040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH CS-86 (A) and New Holland T-4040, field by field
Field	CS-86 (A)	T-4040	Gap
Engine
Engine power, claimed claimed	84.9 hp	84.9 hp	—
Engine declared	MWM WD 401.83	IVECO F4 CE 9484 N (Tier-III)	differs
Displacement declared	—	4.49 L	—
Maximum torque declared	—	275 lb·ft · 373 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry FICHTEL & SACHS double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	14.1 gpm · 53.3 L/min	16.9 gpm · 63.8 L/min	+20% T-4040
Pressure declared	3,481 psi · 240 bar	3,263 psi · 225 bar	+7% CS-86 (A)
Rear PTO speeds declared	390/540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,782 lb · 3,530 kg	8,278 lb · 3,755 kg	+6% T-4040
Maximum permissible mass declared	14,330 lb · 6,500 kg	11,574 lb · 5,250 kg	+24% CS-86 (A)
Wheelbase declared	95.3 in · 2,420 mm	86.0 in · 2,185 mm	+11% CS-86 (A)
Length declared	158.5 in · 4,025 mm	146.6 in · 3,724 mm	+8% CS-86 (A)
Width declared	81.2 in · 2,063 mm	73.5–95.6 in · 1,867–2,428 mm	differs
Height, over the cab declared	104.7 in · 2,660 mm	92.1 in · 2,340 mm	+14% CS-86 (A)
Ground clearance declared	—	15.0 in · 380 mm	—
Fuel tank declared	105.7 qt · 100.0 L	93.0 qt · 88.0 L	+14% CS-86 (A)

Source

Source