- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1947–1957
- 28,746 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
MASSEY-HARRIS Pony 11 Full specifications
CONTINENTAL N-62 four-cylinder petrol. The manufacturer claimed 11.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
11.0 hp
8.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”, claimed
- Weight
- 1,889 lb
- Hyd. flow
- 2.5 gpm
- Top speed
- 7.5 mph
MASSEY-HARRIS Pony 11 specs: key facts
The MASSEY-HARRIS Pony 11 was built from 1947 to 1957.
The MASSEY-HARRIS Pony 11 has a claimed engine power (gross or net not stated) of 8.2 kW (11.0 hp); it has no measured PTO figure.
The MASSEY-HARRIS Pony 11 is two-wheel drive (2WD).
The MASSEY-HARRIS Pony 11 has a CONTINENTAL N-62 engine, a 4-cylinder 1.03 L petrol unit.
The MASSEY-HARRIS Pony 11 weighs 857 kg (1,889 lb) unladen.
The MASSEY-HARRIS Pony 11 has a rear PTO running at 534 rpm.
The hydraulic pump of the MASSEY-HARRIS Pony 11 delivers 9.5 L/min (2.5 gpm).
Source · Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”
How much horsepower does a Pony 11 have?
The only figure for the Pony 11 is 11.0 hp (8.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”
What engine is in a Pony 11?
A Pony 11 has a CONTINENTAL N-62, a 4-cylinder 1.03 L petrol engine.
| Make & model | CONTINENTAL N-62 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 62.7 ci · 1.03 L |
| Electrical system | 6 V |
Source · Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”
How much will a Pony 11 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Pony 11 are below.
| Pump flow | 2.5 gpm · 9.5 L/min |
|---|---|
| Rear PTO | 534 rpm |
Source · Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”
What transmission does a Pony 11 have?
Transmission specifications for the Pony 11 are below.
| Brakes | Pedal-operated drum brake acting on the pinion shaft |
|---|---|
| Steering | Mechanical worm steering |
| Top speed | 7.5 mph · 12 km/h |
Source · Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”
How much does a Pony 11 weigh?
A Pony 11 weighs 1,889 lb (857 kg) unladen.
| Unladen weight | 1,889 lb · 857 kg |
|---|---|
| Wheelbase | 66.0 in · 1,676 mm |
| Length | 99.2 in · 2,520 mm |
| Width | 56.0 in · 1,422 mm |
| Height | 60.0 in · 1,524 mm |
| Ground clearance | 21.0 in · 533 mm |
| Front track | 45.0 in · 1,143 mm |
| Rear track | 41.0–72.0 in · 1,041–1,829 mm |
Source · Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”
Everything else people ask
Is a Pony 11 two-wheel drive or four-wheel drive?
The MASSEY-HARRIS Pony 11 is two-wheel drive (2WD).
What PTO does a Pony 11 have?
A Pony 11 has a 534 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Massey-Harris Massey-Harris Pony 11”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey-Harris Massey-Harris Pony 11 — CC BY-SA 4.0, WIKIBOOKS-TL-117010 · revision 1065837. Wikibooks contributors (Traktorenlexikon). Original document