7 material differences · fewer than 12

Tractor oneHermann Zanker KG M 11949–1951No measured PTO figureTractor twoMASSEY-HARRIS Pony 111947–1957No measured PTO figure

Which should you choose?

Read our verdict on the M 1 and the Pony 11 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 2 fields identical or within 5%, which is not counted as material

Hermann Zanker KG M 1 and MASSEY-HARRIS Pony 11, field by field
Field	M 1	Pony 11	Gap
Engine
Engine power, claimed claimed	11.8 hp	11.0 hp	+7% M 1
Engine declared	Zanker M1	CONTINENTAL N-62	differs
Displacement declared	1.02 L	1.03 L	—
Transmission
Top speed declared	10.6 mph · 17 km/h	7.5 mph · 12 km/h	+42% M 1
Hydraulics & hitch
Pump flow declared	—	2.5 gpm · 9.5 L/min	—
Rear PTO speeds declared	540 rpm	534 rpm	differs
Weight & dimensions
Unladen weight declared	2,612–3,064 lb · 1,185–1,390 kg	1,889 lb · 857 kg	differs
Maximum permissible mass declared	3,748 lb · 1,700 kg	—	—
Wheelbase declared	57.8 in · 1,468 mm	66.0 in · 1,676 mm	+14% Pony 11
Length declared	97.0 in · 2,465 mm	99.2 in · 2,520 mm	—
Width declared	57.9 in · 1,470 mm	56.0–80.0 in · 1,422–2,032 mm	differs
Ground clearance declared	11.8 in · 300 mm	21.0 in · 533 mm	+78% Pony 11
Fuel tank declared	—	27.2 qt · 25.7 L	—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Hermann Zanker KG M 1 sources

Source

Source: Traktorenlexikon, “Zanker M1”
Source: Traktorenlexikon, “Bautz B 14 AS/AS 14”

MASSEY-HARRIS Pony 11 sources