5 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS DX 4.701984–1986No measured PTO figureTractor twoMassey Ferguson MF 698 Turbo1985–1987No measured PTO figure
Which should you choose?
Read our verdict on the DX 4.70 and the MF 698 Turbo → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | DX 4.70 | MF 698 Turbo | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.4 hp | 89 hp | — |
| Engine declared | KHD BF4L 913 | Perkins A 4.236 T. | differs |
| Displacement declared | 4.09 L | 3.86 L | +6% DX 4.70 |
| Maximum torque declared | 236 lb·ft · 320 N·m | 245 lb·ft · 332 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 19.9 mph · 32 km/h | +7% MF 698 Turbo |
| Clutch declared | — | dry single-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 12.9 gpm · 48.8 L/min | 16.5 gpm · 62.5 L/min | +28% MF 698 Turbo |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,488 lb · 3,850 kg | 8,422 lb · 3,820 kg | — |
| Maximum permissible mass declared | 12,787 lb · 5,800 kg | — | — |
| Wheelbase declared | 91.7 in · 2,330 mm | 101.6 in · 2,580 mm | +11% MF 698 Turbo |
| Length declared | 164.2 in · 4,170 mm | 161.0 in · 4,090 mm | — |
| Width declared | 90.7 in · 2,304 mm | — | — |
| Ground clearance declared | 20.9 in · 530 mm | — | — |
| Fuel tank declared | 132.1 qt · 125.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS DX 4.70 sources
- Source: Traktorenlexikon, “Deutz-Allis DX 4.70”
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”
Massey Ferguson MF 698 Turbo sources
- Source: Traktorenlexikon, “Massey Ferguson MF 698T”