• WhichTractor size: Utility
  • No lab test on file
  • 1962–1965

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 42 specs: hp, weight, years

Perkins A 3.152 three-cylinder diesel. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

44.4 hp

33.1 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 42”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,638 lb
3-point lift
2,610 lb
Hyd. flow
4.2 gpm
Top speed
15.5 mph

Massey Ferguson 42 specs: key facts

  • The Massey Ferguson 42 was built from 1962 to 1965.

  • The Massey Ferguson 42 has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.

  • The Massey Ferguson 42 is two-wheel drive (2WD).Source 3

  • The Massey Ferguson 42 has a Perkins A 3.152 engine, a 3-cylinder 2.50 L diesel unit.Source 1

  • The Massey Ferguson 42 weighs 1,650 kg (3,638 lb) unladen.

  • The Massey Ferguson 42 has a dependent rear PTO running at 540 rpm.

  • The three-point hitch of the Massey Ferguson 42 lifts 1,184 kg (2,610 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 42 delivers 15.9 L/min (4.2 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 42”

How does the 42 compare with its class?

  • Limitation:

    A 38.5 L fuel tank is low for its class — 29% below the median of 54 L across the 246 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 272 comparable records. How we work this out

Massey Ferguson 42 tractor
Photo: Joost J. Bakker, CC BY 2.0 via Wikimedia Commons · Wrong photo?

How much horsepower does a 42 have?

The only figure for the 42 is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
44.4 hp

Source · Traktorenlexikon, “Massey Ferguson MF 42”

What engine is in a 42?

A 42 has a Perkins A 3.152, a 3-cylinder 2.50 L diesel engine.

Engine — 42 engine specifications
Make & modelPerkins A 3.152
Cylinders3, liquid-cooledSource 2
Displacement152.7 ci · 2.50 L
Electrical system12 VSource 2

Source · Traktorenlexikon, “Massey Ferguson MF 233”

How much will a 42 lift, and what is its hydraulic flow?

A 42 lifts 2,610 lb (1,184 kg) at the lower-link ends.

Hydraulics & PTO — 42 hydraulics and PTO specifications
Pump flow4.2 gpm · 15.9 L/min
Pressure2,304 psi · 159 barSource 3Sources disagree2,489 psi · 172 bar (Traktorenlexikon, “Massey Ferguson MF 42”)
Hitch categoryCategory 1Source 3On record for 1 of 2 configurations
Lift at ends2,610 lb · 1,184 kg
Rear PTODependent, transmission-driven, 540 rpm @ 1,706 engine rpm
PTO shaft29 x 34,9 x 9,7 mm

Source · Traktorenlexikon, “Massey Ferguson MF 42”

What transmission does a 42 have?

Transmission specifications for the 42 are below.

Transmission — 42 transmission specifications
ClutchPedal operated dry Laycock single disc clutch
SteeringMechanical recirculating ball steeringSource 3On record for 1 of 2 configurations
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 42”

How much does a 42 weigh?

A 42 weighs 3,638 lb (1,650 kg) unladen.

Weights & dimensions — 42 weights and dimensions
Unladen weight3,638 lb · 1,650 kg
Wheelbase72.0 in · 1,830 mm
Length116.9 in · 2,970 mm
Width72.0 in · 1,830 mm
Height55.1 in · 1,400 mm
Ground clearance13.4 in · 340 mm
Front track48.0–79.9 in · 1,220–2,030 mm
Rear track52.0–87.8 in · 1,320–2,230 mm
Turning radius, braked9.0 ft · 2.75 m

Source · Traktorenlexikon, “Massey Ferguson MF 42”

What oil does a 42 take, and how much?

A 42 engine takes 5.4 qt (5.1 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

42 fluid capacities, grades and service intervals
SystemCapacity
Engine oil5.4 qt · 5.1 LSource: Traktorenlexikon, “Massey Ferguson MF 42” · single source, not independently verified
Transmission31.9 qt · 30.2 LSource: Traktorenlexikon, “Massey Ferguson MF 42” · single source, not independently verified
Cooling system10.8 qt · 10.2 LSource: Traktorenlexikon, “Massey Ferguson MF 42” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 42?

Within 10% of its 44.4 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 42

Is a 42 two-wheel drive or four-wheel drive?

The Massey Ferguson 42 is two-wheel drive (2WD).

What PTO does a 42 have?

A 42 has a dependent 540 rpm rear PTO on a 29 x 34,9 x 9,7 mm shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 42”; Traktorenlexikon, “Massey Ferguson MF 42 S”; and Traktorenlexikon, “Massey Ferguson MF 233”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 233 — CC BY-SA 4.0, WIKIBOOKS-TL-86836 · revision 901589. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 42 — CC BY-SA 4.0, WIKIBOOKS-TL-104080 · revision 1089695. Wikibooks contributors (Traktorenlexikon). Original document
  3. Traktorenlexikon: Massey Ferguson MF 42 S — CC BY-SA 4.0, WIKIBOOKS-TL-104239 · revision 848477. Wikibooks contributors (Traktorenlexikon). Original document