WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1992–1997

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 372 (A) specs: hp, weight, years

Perkins A 4.236 four-cylinder diesel. The manufacturer claimed 70.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

70.1 hp

52.3 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 372”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,173 lb
3-point lift
4,729 lb
Hyd. flow
16.9 gpm
Top speed
18.6–24.9 mph

Massey Ferguson 372 (A) specs: key facts

  • The Massey Ferguson 372 (A) was built from 1992 to 1997.

  • The Massey Ferguson 372 (A) has a claimed engine power (gross or net not stated) of 52.3 kW (70.1 hp); it has no measured PTO figure.

  • The Massey Ferguson 372 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 372 (A) has a Perkins A 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 1

  • The Massey Ferguson 372 (A) weighs 2,800 kg (6,173 lb) unladen.

  • The Massey Ferguson 372 (A) has an independent rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the Massey Ferguson 372 (A) lifts 2,145 kg (4,729 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 372 (A) delivers 64.0 L/min (16.9 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 372”

How does the 372 (A) compare with its class?

  • Strength:

    A hydraulic pump flow of 64 L/min is high for its class — 60% above the median of 40 L/min across the 341 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 414 comparable records. How we work this out

Illustration of the 1992–1997 Massey Ferguson MF 372 (A), a 70 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 372 (A) have?

The only figure for the 372 (A) is 70.1 hp (52.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
70.1 hp

Source · Traktorenlexikon, “Massey Ferguson MF 372”

What engine is in a 372 (A)?

A 372 (A) has a Perkins A 4.236, a 4-cylinder 3.87 L diesel engine.

Engine — 372 (A) engine specifications
Make & modelPerkins A 4.236
Cylinders4, liquid-cooledSource 2
Displacement236.0 ci · 3.87 L
Max torque181 lb·ft · 246 N·m @ 1,255 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”

How much will a 372 (A) lift, and what is its hydraulic flow?

A 372 (A) lifts 4,729 lb (2,145 kg) at the lower-link ends.

Hydraulics & PTO — 372 (A) hydraulics and PTO specifications
Pump flow16.9 gpm · 64.0 L/min
Pressure2,466 psi · 170 bar
Lift at ends4,729 lb · 2,145 kg
Rear PTOIndependent, engine-driven, 540 rpm / 1000 rpm @ 1,979 engine rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Massey Ferguson MF 372”

What transmission does a 372 (A) have?

Transmission specifications for the 372 (A) are below.

Transmission — 372 (A) transmission specifications
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 372”

How much does a 372 (A) weigh?

A 372 (A) weighs 6,173 lb (2,800 kg) unladen.

Weights & dimensions — 372 (A) weights and dimensions
Unladen weight6,173 lb · 2,800 kgtwo-wheel-drive version
Wheelbase87.3 in · 2,217 mm
Length147.0 in · 3,734 mm
Width75.2 in · 1,910 mm
Height98.1 in · 2,492 mm
Ground clearance14.2 in · 360 mmtwo-wheel-drive version
Rear track56.3–73.2 in · 1,430–1,860 mm

Source · Traktorenlexikon, “Massey Ferguson MF 372”

What oil does a 372 (A) take, and how much?

A 372 (A) engine takes 7.9 qt (7.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

372 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.9 qt · 7.5 LSource: Traktorenlexikon, “Massey Ferguson MF 372” · single source, not independently verified
Transmission50.1 qt · 47.4 LSource: Traktorenlexikon, “Massey Ferguson MF 372” · single source, not independently verified
Front axle9.5 qt · 9.0 LSource: Traktorenlexikon, “Massey Ferguson MF 372” · single source, not independently verified
Cooling system16.0 qt · 15.1 LSource: Traktorenlexikon, “Massey Ferguson MF 372” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 372 (A)?

Within 10% of its 70.1 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 372 (A)

Is a 372 (A) two-wheel drive or four-wheel drive?

The Massey Ferguson 372 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 372 (A) have?

A 372 (A) has a independent 540 rpm / 1000 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 372”; and Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 168 & MF 168A — CC BY-SA 4.0, WIKIBOOKS-TL-69277 · revision 1065377. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 372 — CC BY-SA 4.0, WIKIBOOKS-TL-104526 · revision 992170. Wikibooks contributors (Traktorenlexikon). Original document