9 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 80 (New)2004No measured PTO figureTractor twoMassey Ferguson MF 372 (A)1992–1997No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 80 (New) and the MF 372 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Agrotron 80 (New) | MF 372 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70.1 hp | 70.1 hp | — |
| Engine declared | Deutz BF4M 2012 E | Perkins A 4.236 | differs |
| Displacement declared | 4.04 L | 3.87 L | — |
| Maximum torque declared | 240 lb·ft · 325 N·m | 181 lb·ft · 246 N·m | +32% Agrotron 80 (New) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Electrohydraulically operated wet ZF multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 16.9 gpm · 64.0 L/min | — |
| Pressure declared | — | 2,466 psi · 170 bar | — |
| Three-point lift, at the coupling points declared | 13,713 lb · 6,220 kg | 4,729 lb · 2,145 kg | +190% Agrotron 80 (New) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,590 lb · 4,350 kg | 6,173 lb · 2,800 kg | +55% Agrotron 80 (New) |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 95.2 in · 2,419 mm | 87.3 in · 2,217 mm | +9% Agrotron 80 (New) |
| Length declared | 163.0 in · 4,139 mm | 147.0 in · 3,734 mm | +11% Agrotron 80 (New) |
| Width declared | 88.8 in · 2,256 mm | 75.2 in · 1,910 mm | +18% Agrotron 80 (New) |
| Ground clearance declared | 18.7 in · 475 mm | 14.2 in · 360 mm | +32% Agrotron 80 (New) |
| Fuel tank declared | 190.2 qt · 180 L | 79.3 qt · 75.0 L | +140% Agrotron 80 (New) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 80 (New) sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 80 (New)”
Massey Ferguson MF 372 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 372”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”