• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1986–1992

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 3060 (A) specs: hp, weight, years

Perkins A 4.248 LF four-cylinder diesel. The manufacturer claimed 76.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

76.0 hp

56.7 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 3060”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,859 lb
3-point lift
6,351 lb
Hyd. flow
13.6 gpm
Top speed
18.6 mph

Massey Ferguson 3060 (A) specs: key facts

  • The Massey Ferguson 3060 (A) was built from 1986 to 1992.

  • The Massey Ferguson 3060 (A) has a claimed engine power (gross or net not stated) of 56.7 kW (76.0 hp); it has no measured PTO figure.

  • The Massey Ferguson 3060 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 3060 (A) has a Perkins A 4.248 LF engine, a 4-cylinder 4.07 L diesel unit.

  • The Massey Ferguson 3060 (A) weighs 3,565 kg (7,859 lb) unladen.

  • The Massey Ferguson 3060 (A) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson 3060 (A) lifts 2,881 kg (6,351 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 3060 (A) delivers 51.5 L/min (13.6 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 3060”

How does the 3060 (A) compare with its class?

  • Strength:

    32 forward gears is high for its class — 167% above the median of 12 across the 399 machines within 10% of its power that hold this figure.

  • Strength:

    A 148 L fuel tank is high for its class — 64% above the median of 90 L across the 378 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 409 comparable records. How we work this out

Illustration of the 1986–1992 Massey Ferguson MF 3060 (A), a 76 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 3060 (A) have?

The only figure for the 3060 (A) is 76.0 hp (56.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
76.0 hp

Source · Traktorenlexikon, “Massey Ferguson MF 3060”

What engine is in a 3060 (A)?

A 3060 (A) has a Perkins A 4.248 LF, a 4-cylinder 4.07 L diesel engine.

Engine — 3060 (A) engine specifications
Make & modelPerkins A 4.248 LF
Cylinders4, liquid-cooled
Displacement248.4 ci · 4.07 L
Max torque201 lb·ft · 272 N·m @ 1,288 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 3060”

How much will a 3060 (A) lift, and what is its hydraulic flow?

A 3060 (A) lifts 6,351 lb (2,881 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 3060 (A) hydraulics and PTO specifications
Pump flow13.6 gpm · 51.5 L/min
Pressure2,277–2,350 psi · 157–162 bar
Hitch categoryCategory 2
Lift at ends6,351 lb · 2,881 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,980 engine rpmEngages under load

Source · Traktorenlexikon, “Massey Ferguson MF 3060”

What transmission does a 3060 (A) have?

Transmission specifications for the 3060 (A) are below.

Transmission — 3060 (A) transmission specifications
Clutchpedal-operated dry and air-cooled single-disc clutch
Steeringhydrostatic Danfoss steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 3060”

How much does a 3060 (A) weigh?

A 3060 (A) weighs 7,859 lb (3,565 kg) unladen.

Weights & dimensions — 3060 (A) weights and dimensions
Unladen weight7,859 lb · 3,565 kgtwo-wheel-drive version
Wheelbase93.5 in · 2,375 mm
Length155.9 in · 3,959 mm
Width74.4 in · 1,889 mm
Height103.1 in · 2,620 mm
Ground clearance22.2 in · 565 mmtwo-wheel-drive version
Front track54.4–86.3 in · 1,383–2,193 mmtwo-wheel-drive version
Rear track59.1–83.3 in · 1,502–2,117 mm

Source · Traktorenlexikon, “Massey Ferguson MF 3060”

What oil does a 3060 (A) take, and how much?

A 3060 (A) engine takes 8.5 qt (8.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

3060 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil8.5 qt · 8.0 LSource: Traktorenlexikon, “Massey Ferguson MF 3060” · single source, not independently verified
Hydraulic67.6 qt · 64.0 LSource: Traktorenlexikon, “Massey Ferguson MF 3060” · single source, not independently verified
Front axle14.8 qt · 14.0 LSource: Traktorenlexikon, “Massey Ferguson MF 3060” · single source, not independently verified
Cooling system17.5 qt · 16.6 LSource: Traktorenlexikon, “Massey Ferguson MF 3060” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 3060 (A)?

Within 10% of its 64.7 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 3060 (A)

Is a 3060 (A) two-wheel drive or four-wheel drive?

The Massey Ferguson 3060 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 3060 (A) have?

A 3060 (A) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 3060”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 3060 — CC BY-SA 4.0, WIKIBOOKS-TL-87074 · revision 1016003. Wikibooks contributors (Traktorenlexikon). Original document