10 material differences · fewer than 12
Tractor oneIMR-RAKOVICA R-76 Standard1979–1989No measured PTO figureTractor twoMassey Ferguson MF 3060 (A)1986–1992No measured PTO figure
Which should you choose?
Read our verdict on the R-76 Standard and the MF 3060 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | R-76 Standard | MF 3060 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.0 hp | 76.0 hp | — |
| Engine declared | IMR-PERKINS S-44 A/T | Perkins A 4.248 LF | differs |
| Displacement declared | 4.07 L | 4.07 L | — |
| Maximum torque declared | 181 lb·ft · 245 N·m | 201 lb·ft · 272 N·m | +11% MF 3060 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated two-stage dry double clutch | pedal-operated dry and air-cooled single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.9 gpm · 29.9 L/min | 13.6 gpm · 51.5 L/min | +72% MF 3060 (A) |
| Pressure declared | — | 2,277–2,350 psi · 157–162 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,993 lb · 2,265 kg | 7,859 lb · 3,565 kg | +57% MF 3060 (A) |
| Wheelbase declared | 83.5 in · 2,120 mm | 93.5 in · 2,375 mm | +12% MF 3060 (A) |
| Length declared | 134.6 in · 3,420 mm | 155.9 in · 3,959 mm | +16% MF 3060 (A) |
| Width declared | 74.8 in · 1,900 mm | 74.4 in · 1,889 mm | — |
| Ground clearance declared | 17.7 in · 450 mm | 22.2 in · 565 mm | +26% MF 3060 (A) |
| Turning radius, braked declared | 11.0 ft · 3.36 m | — | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 156.4 qt · 148.0 L | +147% MF 3060 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
IMR-RAKOVICA R-76 Standard sources
- Source: Traktorenlexikon, “Rakovica R 76”
Massey Ferguson MF 3060 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 3060”