10 material differences · fewer than 12
Tractor oneDeutz-Fahr D 6907 A ( C )1983–1984No measured PTO figureTractor twoMassey Ferguson MF 3060 (A)1986–1992No measured PTO figure
Which should you choose?
Read our verdict on the D 6907 A ( C ) and the MF 3060 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | D 6907 A ( C ) | MF 3060 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 68 hp | 76.0 hp | +11% MF 3060 (A) |
| Engine declared | KHD F4L 912 | Perkins A 4.248 LF | differs |
| Displacement declared | 3.77 L | 4.07 L | +8% MF 3060 (A) |
| Maximum torque declared | 175 lb·ft · 237 N·m | 201 lb·ft · 272 N·m | +15% MF 3060 (A) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | pedal-operated dry and air-cooled single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 13.6 gpm · 51.5 L/min | — |
| Pressure declared | — | 2,277–2,350 psi · 157–162 bar | — |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,393 lb · 2,900 kg | 7,859 lb · 3,565 kg | +23% MF 3060 (A) |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 85.8 in · 2,180 mm | 93.5 in · 2,375 mm | +9% MF 3060 (A) |
| Length declared | 144.3 in · 3,664 mm | 155.9 in · 3,959 mm | +8% MF 3060 (A) |
| Width declared | 81.1 in · 2,060 mm | 74.4 in · 1,889 mm | +9% D 6907 A ( C ) |
| Ground clearance declared | 15.0 in · 380 mm | 22.2 in · 565 mm | +49% MF 3060 (A) |
| Fuel tank declared | 95.1 qt · 90 L | 156.4 qt · 148.0 L | +64% MF 3060 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 6907 A ( C ) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 6907”
- Source: Traktorenlexikon, “Deutz D 6006”
Massey Ferguson MF 3060 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 3060”