WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1982–1987

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson MF 274 S (A) Full specifications

Perkins A 4.236 four-cylinder diesel. The manufacturer claimed 64.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

64.1 hp

47.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 274 (S)”, claimed

Weight
6,305 lb
3-point lift
4,321 lb
Hyd. flow
7.7 gpm
Top speed
15.5 mph

Massey Ferguson MF 274 S (A) specs: key facts

  • The Massey Ferguson MF 274 S (A) was built from 1982 to 1987.

  • The Massey Ferguson MF 274 S (A) has a claimed engine power (gross or net not stated) of 47.8 kW (64.1 hp); it has no measured PTO figure.

  • The Massey Ferguson MF 274 S (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Massey Ferguson MF 274 S (A) has a Perkins A 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 1

  • The Massey Ferguson MF 274 S (A) weighs 2,860 kg (6,305 lb) unladen.

  • The Massey Ferguson MF 274 S (A) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson MF 274 S (A) lifts 1,960 kg (4,321 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson MF 274 S (A) delivers 29.0 L/min (7.7 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 274 (S)”

How much horsepower does an MF 274 S (A) have?

The only figure for the MF 274 S (A) is 64.1 hp (47.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
64.1 hp

Source · Traktorenlexikon, “Massey Ferguson MF 274 (S)”

What engine is in an MF 274 S (A)?

An MF 274 S (A) has a Perkins A 4.236, a 4-cylinder 3.87 L diesel engine.

Engine — MF 274 S (A) engine specifications
Make & modelPerkins A 4.236
Cylinders4, liquid-cooledSource 2
Displacement236.0 ci · 3.87 L
Max torque176 lb·ft · 239 N·m @ 1,300 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”

How much will an MF 274 S (A) lift, and what is its hydraulic flow?

An MF 274 S (A) lifts 4,321 lb (1,960 kg) at the lower-link ends.

Hydraulics & PTO — MF 274 S (A) hydraulics and PTO specifications
Pump flow7.7 gpm · 29.0 L/min
Lift at ends4,321 lb · 1,960 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,944 engine rpmEngages under loadGround-speed PTO available

Source · Traktorenlexikon, “Massey Ferguson MF 274 (S)”

What transmission does an MF 274 S (A) have?

Transmission specifications for the MF 274 S (A) are below.

Transmission — MF 274 S (A) transmission specifications
ClutchPedal operated dry and air cooled double clutch
BrakesHydraulically operated disc brake acting on differential side shafts
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 274 (S)”

How much does an MF 274 S (A) weigh?

An MF 274 S (A) weighs 6,305 lb (2,860 kg) unladen.

Weights & dimensions — MF 274 S (A) weights and dimensions
Unladen weight6,305 lb · 2,860 kgtwo-wheel-drive version
Wheelbase86.2 in · 2,190 mm
Length143.7 in · 3,650 mm
Width76.0 in · 1,930 mm
Height103.1 in · 2,620 mm
Ground clearance15.4 in · 390 mm
Front track55.1–74.8 in · 1,400–1,900 mm
Rear track60.2–65.4 in · 1,530–1,660 mm
Turning radius, braked11.2 ft · 3.40 mtwo-wheel-drive version

Source · Traktorenlexikon, “Massey Ferguson MF 274 (S)”

Which tractors compare with an MF 274 S (A)?

Within 10% of its 57.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is an MF 274 S (A) two-wheel drive or four-wheel drive?

The Massey Ferguson MF 274 S (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does an MF 274 S (A) have?

An MF 274 S (A) has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Massey Ferguson MF 274 (S)”; and Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 168 & MF 168A — CC BY-SA 4.0, WIKIBOOKS-TL-69277 · revision 1065377. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 274 (S) — CC BY-SA 4.0, WIKIBOOKS-TL-104304 · revision 992120. Wikibooks contributors (Traktorenlexikon). Original document