8 material differences · fewer than 12
Tractor oneHürlimann H-466 (A)1983–1986No measured PTO figureTractor twoMassey Ferguson MF 274 S (A)1982–1987No measured PTO figure
Which should you choose?
Read our verdict on the H-466 (A) and the MF 274 S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | H-466 (A) | MF 274 S (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | Hürlimann H-916.4 W | Perkins A 4.236 | differs |
| Displacement declared | 3.66 L | 3.87 L | +6% MF 274 S (A) |
| Maximum torque declared | 174 lb·ft · 236 N·m | 176 lb·ft · 239 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% H-466 (A) |
| Clutch declared | Pedal-operated dry SLH single-disc clutch as driving clutch | Pedal operated dry and air cooled double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.7 gpm · 29.0 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,261 lb · 2,840 kg | 6,305 lb · 2,860 kg | — |
| Wheelbase declared | 92.9 in · 2,360 mm | 86.2 in · 2,190 mm | +8% H-466 (A) |
| Length declared | 159.4 in · 4,050 mm | 143.7 in · 3,650 mm | +11% H-466 (A) |
| Width declared | 80.7 in · 2,050 mm | 76.0 in · 1,930 mm | +6% H-466 (A) |
| Ground clearance declared | 16.1 in · 410 mm | 15.4 in · 390 mm | — |
| Turning radius, braked declared | — | 11.2 ft · 3.40 m | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 65.5 qt · 62 L | +13% H-466 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-466 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 466”
Massey Ferguson MF 274 S (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 274 (S)”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”