• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1969–1974
  • 7,032 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson MF 1080 (A) Full specifications

Perkins A 4.318 four-cylinder diesel. The manufacturer claimed 86.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

86.9 hp

64.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 1080”, claimed

Weight
8,532 lb
3-point lift
6,173 lb
Hyd. flow
7.0 gpm
Top speed
18.6 mph

Massey Ferguson MF 1080 (A) specs: key facts

  • The Massey Ferguson MF 1080 (A) was built from 1969 to 1974.

  • The Massey Ferguson MF 1080 (A) has a claimed engine power (gross or net not stated) of 64.8 kW (86.9 hp); it has no measured PTO figure.

  • The Massey Ferguson MF 1080 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Massey Ferguson MF 1080 (A) has a Perkins A 4.318 engine, a 4-cylinder 5.21 L diesel unit.

  • The Massey Ferguson MF 1080 (A) weighs 3,870 kg (8,532 lb) unladen.

  • The Massey Ferguson MF 1080 (A) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson MF 1080 (A) lifts 2,800 kg (6,173 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson MF 1080 (A) delivers 26.5 L/min (7.0 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 1080”

How much horsepower does an MF 1080 (A) have?

The only figure for the MF 1080 (A) is 86.9 hp (64.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
86.9 hp

Source · Traktorenlexikon, “Massey Ferguson MF 1080”

What engine is in an MF 1080 (A)?

An MF 1080 (A) has a Perkins A 4.318, a 4-cylinder 5.21 L diesel engine.

Engine — MF 1080 (A) engine specifications
Make & modelPerkins A 4.318
Cylinders4, liquid-cooled
Displacement318.0 ci · 5.21 L
Max torque256 lb·ft · 347 N·m @ 1,300 rpm
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 1080”

How much will an MF 1080 (A) lift, and what is its hydraulic flow?

An MF 1080 (A) lifts 6,173 lb (2,800 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — MF 1080 (A) hydraulics and PTO specifications
Pump flow7.0 gpm · 26.5 L/min
Hitch categoryCategory 2
Lift at ends6,173 lb · 2,800 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,720 engine rpmEngages under load
PTO shaft1 3/8"-6 splines (Form-A)

Source · Traktorenlexikon, “Massey Ferguson MF 1080”

What transmission does an MF 1080 (A) have?

Transmission specifications for the MF 1080 (A) are below.

Transmission — MF 1080 (A) transmission specifications
ClutchPedal-operated dry LUK single-disc clutch with 305 mm diameter
SteeringHydrostatic Danfoss steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 1080”

How much does an MF 1080 (A) weigh?

An MF 1080 (A) weighs 8,532 lb (3,870 kg) unladen.

Weights & dimensions — MF 1080 (A) weights and dimensions
Unladen weight8,532 lb · 3,870 kgtwo-wheel-drive version
Wheelbase97.6 in · 2,480 mmtwo-wheel-drive version
Length156.3 in · 3,970 mmtwo-wheel-drive version
Width77.6 in · 1,970 mmtwo-wheel-drive version
Height106.3 in · 2,700 mmtwo-wheel-drive version
Ground clearance16.1 in · 410 mmtwo-wheel-drive version
Front track55.9–79.9 in · 1,420–2,030 mmtwo-wheel-drive version
Rear track60.6–72.4 in · 1,540–1,840 mmtwo-wheel-drive version
Turning radius, braked10.7 ft · 3.26 m

Source · Traktorenlexikon, “Massey Ferguson MF 1080”

Which tractors compare with an MF 1080 (A)?

Within 10% of its 86.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an MF 1080 (A) two-wheel drive or four-wheel drive?

The Massey Ferguson MF 1080 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does an MF 1080 (A) have?

An MF 1080 (A) has a independent 540/1000 rpm rear PTO on a 1 3/8"-6 splines (Form-A) shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Massey Ferguson MF 1080”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 1080CC BY-SA 4.0, WIKIBOOKS-TL-76087 · revision 1068893. Wikibooks contributors (Traktorenlexikon). Original document