7 material differences · fewer than 12
Tractor oneMassey Ferguson MF 10041978–1990No measured PTO figureTractor twoMassey Ferguson MF 1080 (A)1969–1974No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1978–1990; 1969–1974). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | MF 1004 | MF 1080 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.9 hp | 86.9 hp | — |
| Engine declared | Perkins A 4.318.2 | Perkins A 4.318 | differs |
| Displacement declared | 5.21 L | 5.21 L | — |
| Maximum torque declared | 254 lb·ft · 344 N·m | 256 lb·ft · 347 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry and air-cooled single-disc clutch | Pedal-operated dry LUK single-disc clutch with 305 mm diameter | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.2 gpm · 27.3 L/min | 7.0 gpm · 26.5 L/min | — |
| Three-point lift, at the coupling points declared | 8,157 lb · 3,700 kg | 6,173 lb · 2,800 kg | +32% MF 1004 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,039 lb · 4,100 kg | 8,532 lb · 3,870 kg | +6% MF 1004 |
| Wheelbase declared | 95.7 in · 2,432 mm | 97.6 in · 2,480 mm | — |
| Length declared | 162.2 in · 4,120 mm | 156.3 in · 3,970 mm | — |
| Width declared | 87.8 in · 2,230 mm | 77.6 in · 1,970 mm | +13% MF 1004 |
| Ground clearance declared | 16.3 in · 413 mm | 16.1 in · 410 mm | — |
| Turning radius, braked declared | 14.9 ft · 4.55 m | 10.7 ft · 3.26 m | +40% MF 1004 |
| Fuel tank declared | 153.2 qt · 145.0 L | 167.0 qt · 158.0 L | +9% MF 1080 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 1004 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1004”
- Source: Traktorenlexikon, “Massey Ferguson MF 698”
- Source: Traktorenlexikon, “Massey Ferguson MF 1004 T”
Massey Ferguson MF 1080 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1080”