WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1987–1994

It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 1007 (A) specs: hp, weight, years

Perkins AT 4.236 four-cylinder diesel. The manufacturer claimed 91.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

91.7 hp

68.4 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 1007”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,893 lb
3-point lift
9,480 lb
Hyd. flow
11.5 gpm
Top speed
18.6–24.9 mph

Massey Ferguson 1007 (A) specs: key facts

  • The Massey Ferguson 1007 (A) was built from 1987 to 1994.

  • The Massey Ferguson 1007 (A) has a claimed engine power (gross or net not stated) of 68.4 kW (91.7 hp); it has no measured PTO figure.

  • The Massey Ferguson 1007 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 1007 (A) has a Perkins AT 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 2

  • The Massey Ferguson 1007 (A) weighs 3,580 kg (7,893 lb) unladen.

  • The Massey Ferguson 1007 (A) has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson 1007 (A) lifts 4,300 kg (9,480 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 1007 (A) delivers 43.7 L/min (11.5 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 1007”

Illustration of the 1987–1994 Massey Ferguson MF 1007 (A), a 92 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 1007 (A) have?

The only figure for the 1007 (A) is 91.7 hp (68.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
91.7 hp

Source · Traktorenlexikon, “Massey Ferguson MF 1007”

What engine is in a 1007 (A)?

A 1007 (A) has a Perkins AT 4.236, a 4-cylinder 3.87 L diesel engine.

Engine — 1007 (A) engine specifications
Make & modelPerkins AT 4.236Source 2
Cylinders4, liquid-cooledSource 2
Displacement236.2 ci · 3.87 LSource 2
Max torque255 lb·ft · 346 N·m @ 1,298 rpm
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 1007”

How much will a 1007 (A) lift, and what is its hydraulic flow?

A 1007 (A) lifts 9,480 lb (4,300 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 1007 (A) hydraulics and PTO specifications
SystemOpen centre
Pump flow11.5 gpm · 43.7 L/min
Hitch categoryCategory 2
Lift at ends9,480 lb · 4,300 kg
Rear PTO540/1000 rpm @ 1,944 engine rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Massey Ferguson MF 1007”

What transmission does a 1007 (A) have?

Transmission specifications for the 1007 (A) are below.

Transmission — 1007 (A) transmission specifications
ClutchDry and air-cooled double clutch
BrakesHydraulically operated wet multi-disc brake acting on differential side shafts
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 1007”

How much does a 1007 (A) weigh?

A 1007 (A) weighs 7,893 lb (3,580 kg) unladen.

Weights & dimensions — 1007 (A) weights and dimensions
Unladen weight7,893 lb · 3,580 kgtwo-wheel-drive version
Maximum permissible mass14,330 lb · 6,500 kg
Wheelbase97.0 in · 2,463 mmtwo-wheel-drive version
Length155.5 in · 3,950 mm
Width80.3 in · 2,040 mm
Height103.9 in · 2,640 mm
Ground clearance18.1 in · 460 mmtwo-wheel-drive version
Front track58.9–78.5 in · 1,495–1,995 mmtwo-wheel-drive version
Rear track55.1–78.7 in · 1,400–2,000 mm
Turning radius, braked12.8 ft · 3.89 mtwo-wheel-drive version

Source · Traktorenlexikon, “Massey Ferguson MF 1007”

What oil does a 1007 (A) take, and how much?

A 1007 (A) engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

1007 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil9.0 qt · 8.5 LSource: Traktorenlexikon, “Massey Ferguson MF 1007” · single source, not independently verified
Hydraulic34.9 qt · 33.0 LSource: Traktorenlexikon, “Massey Ferguson MF 1007” · single source, not independently verified
Front axle6.1 qt · 5.8 LSource: Traktorenlexikon, “Massey Ferguson MF 1007” · single source, not independently verified
Cooling system23.2 qt · 22.0 LSource: Traktorenlexikon, “Massey Ferguson MF 1007” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 1007 (A)?

Within 10% of its 91.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 1007 (A)

Is a 1007 (A) two-wheel drive or four-wheel drive?

The Massey Ferguson 1007 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 1007 (A) have?

A 1007 (A) has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 398”; and Traktorenlexikon, “Massey Ferguson MF 1007”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 1007 — CC BY-SA 4.0, WIKIBOOKS-TL-86934 · revision 992179. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 398 — CC BY-SA 4.0, WIKIBOOKS-TL-86891 · revision 992161. Wikibooks contributors (Traktorenlexikon). Original document