11 material differences · fewer than 12
Tractor oneMassey Ferguson MF 1007 (A)1987–1994No measured PTO figureTractor twoRenault 103-52 TX1989–1990No measured PTO figure
Which should you choose?
Read our verdict on the MF 1007 (A) and the 103-52 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | MF 1007 (A) | 103-52 TX | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 91.7 hp | 91.7 hp | — |
| Engine declared | Perkins AT 4.236 | MWM TD 226-4 | differs |
| Displacement declared | 3.87 L | 4.16 L | +7% 103-52 TX |
| Maximum torque declared | 255 lb·ft · 346 N·m | 232 lb·ft · 314 N·m | +10% MF 1007 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry and air-cooled double clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 11.5 gpm · 43.7 L/min | 11.1 gpm · 42.0 L/min | — |
| Three-point lift, at the coupling points declared | 9,480 lb · 4,300 kg | 13,669 lb · 6,200 kg | +44% 103-52 TX |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,893 lb · 3,580 kg | 9,645 lb · 4,375 kg | +22% 103-52 TX |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 97.0 in · 2,463 mm | 99.1 in · 2,516 mm | — |
| Length declared | 155.5 in · 3,950 mm | 169.0 in · 4,292 mm | +9% 103-52 TX |
| Width declared | 80.3 in · 2,040 mm | 80.1–95.6 in · 2,035–2,429 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 20.1 in · 510 mm | +11% 103-52 TX |
| Turning radius, braked declared | 12.8 ft · 3.89 m | 13.8 ft · 4.20 m | +8% 103-52 TX |
| Fuel tank declared | 107.8 qt · 102.0 L | 137.4 qt · 130.0 L | +27% 103-52 TX |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 1007 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1007”
- Source: Traktorenlexikon, “Massey Ferguson MF 398”
Renault 103-52 TX sources
- Source: Traktorenlexikon, “Renault 103-52 TE/TA/TS/TX R7821”
- Source: Traktorenlexikon, “Renault 851 R7661”