3 material differences · fewer than 12
Tractor oneLandini R-9880 (DT) TL-45 N/A (TL-45 DT/A)1987–2000No measured PTO figureTractor twoMassey Ferguson MF 1007 (A)1987–1994No measured PTO figure
Which should you choose?
Read our verdict on the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the MF 1007 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
3 material differences · 12 fields identical or within 5%, which is not counted as material
| Field | R-9880 (DT) TL-45 N/A (TL-45 DT/A) | MF 1007 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 91.7 hp | 91.7 hp | — |
| Engine declared | Perkins TL 4.236 | Perkins AT 4.236 | differs |
| Displacement declared | 3.86 L | 3.87 L | — |
| Maximum torque declared | 255 lb·ft · 346 N·m | 255 lb·ft · 346 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | — | Dry and air-cooled double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 11.5 gpm · 43.7 L/min | 11.5 gpm · 43.7 L/min | — |
| Three-point lift, at the coupling points declared | 7,893 lb · 3,580 kg | 9,480 lb · 4,300 kg | +20% MF 1007 (A) |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,893 lb · 3,580 kg | 7,893 lb · 3,580 kg | — |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 97.0 in · 2,463 mm | 97.0 in · 2,463 mm | — |
| Length declared | 155.5 in · 3,950 mm | 155.5 in · 3,950 mm | — |
| Width declared | 80.3 in · 2,040 mm | 80.3 in · 2,040 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | 18.1 in · 460 mm | — |
| Turning radius, braked declared | 12.8 ft · 3.89 m | 12.8 ft · 3.89 m | — |
| Fuel tank declared | 107.8 qt · 102.0 L | 107.8 qt · 102.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) sources
- Source: Traktorenlexikon, “Landini 9880”
Massey Ferguson MF 1007 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1007”
- Source: Traktorenlexikon, “Massey Ferguson MF 398”