9 material differences · fewer than 12

Tractor oneAgco DT-250 B2009–2010No measured PTO figureTractor twoMassey Ferguson MF 84802004–2008No measured PTO figure

Which should you choose?

Read our verdict on the DT-250 B and the MF 8480 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Agco DT-250 B and Massey Ferguson MF 8480, field by field
Field	DT-250 B	MF 8480	Gap
Engine
Engine power, claimed claimed	286.0 hp	286.2 hp	—
Engine declared	SISU-DIESEL 84 CTA-4V	SISU-Power 84.329 ETA	differs
Displacement declared	8.42 L	8.42 L	—
Maximum torque declared	—	798 lb·ft · 1,082 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	27.9 gpm · 105.5 L/min	37.0 gpm · 140.2 L/min	+33% MF 8480
Pressure declared	3,336 psi · 230 bar	2,176 psi · 150 bar	+53% DT-250 B
Rear PTO speeds declared	1000 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	25,838 lb · 11,720 kg	21,440 lb · 9,725 kg	+21% DT-250 B
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	122.2 in · 3,105 mm	121.1 in · 3,075 mm	—
Length declared	215.7 in · 5,479 mm	209.4 in · 5,320 mm	—
Width declared	79.3 in · 2,014 mm	100.4 in · 2,550 mm	+27% MF 8480
Height, over the cab declared	141.0 in · 3,581 mm	125.2 in · 3,180 mm	+13% DT-250 B
Ground clearance declared	18.5 in · 470 mm	19.7 in · 500 mm	+6% MF 8480
Turning radius, braked declared	24.3 ft · 7.40 m	—	—
Fuel tank declared	623.4 qt · 590.0 L	697.4 qt · 660.0 L	+12% MF 8480

Source

Source