• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1995–1999

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson MF 8130 A Full specifications

Perkins 1006.60 THR 4 six-cylinder diesel. The manufacturer claimed 153.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

153.0 hp

114.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 8130”, claimed

Weight
12,522 lb
3-point lift
12,434 lb
Hyd. flow
14.1 gpm
Top speed
18.6–24.9 mph

Massey Ferguson MF 8130 A specs: key facts

  • The Massey Ferguson MF 8130 A was built from 1995 to 1999.

  • The Massey Ferguson MF 8130 A has a claimed engine power (gross or net not stated) of 114.1 kW (153.0 hp); it has no measured PTO figure.

  • The Massey Ferguson MF 8130 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Massey Ferguson MF 8130 A has a Perkins 1006.60 THR 4 engine, a 6-cylinder 5.99 L diesel unit.

  • The Massey Ferguson MF 8130 A weighs 5,680 kg (12,522 lb) unladen.

  • The Massey Ferguson MF 8130 A has an independent rear PTO running at 540/540E/1000 rpm.

  • The three-point hitch of the Massey Ferguson MF 8130 A lifts 5,640 kg (12,434 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson MF 8130 A delivers 53.3 L/min (14.1 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 8130”

How much horsepower does an MF 8130 A have?

The only figure for the MF 8130 A is 153.0 hp (114.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
153.0 hp

Source · Traktorenlexikon, “Massey Ferguson MF 8130”

What engine is in an MF 8130 A?

An MF 8130 A has a Perkins 1006.60 THR 4, a 6-cylinder 5.99 L diesel engine.

Engine — MF 8130 A engine specifications
Make & modelPerkins 1006.60 THR 4
Cylinders6, liquid-cooled
Displacement365.3 ci · 5.99 L
Max torque458 lb·ft · 621 N·m @ 1,443 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 8130”

How much will an MF 8130 A lift, and what is its hydraulic flow?

An MF 8130 A lifts 12,434 lb (5,640 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — MF 8130 A hydraulics and PTO specifications
Pump flow14.1 gpm · 53.3 L/min
Pressure2,901 psi · 200 bar
Hitch categoryCategory 2
Lift at ends12,434 lb · 5,640 kg
Rear PTOIndependent, engine-driven, 540/540E/1000 rpm @ 1,993 engine rpmEngages under load

Source · Traktorenlexikon, “Massey Ferguson MF 8130”

What transmission does an MF 8130 A have?

Transmission specifications for the MF 8130 A are below.

Transmission — MF 8130 A transmission specifications
ClutchPedal-operated dry VALEO double clutch
BrakesHydraulically operated wet Girling disc brake acting on differential side shafts
SteeringHydrostatic DANFOSS steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 8130”

How much does an MF 8130 A weigh?

An MF 8130 A weighs 12,522 lb (5,680 kg) unladen.

Weights & dimensions — MF 8130 A weights and dimensions
Unladen weight12,522 lb · 5,680 kgtwo-wheel-drive version
Maximum permissible mass25,353 lb · 11,500 kg
Wheelbase109.3 in · 2,777 mmtwo-wheel-drive version
Length199.7 in · 5,073 mm
Width90.8 in · 2,306 mm
Height115.8 in · 2,941 mm
Ground clearance17.4 in · 442 mm
Front track60.7–91.9 in · 1,543–2,333 mmtwo-wheel-drive version
Rear track62.5–77.2 in · 1,588–1,960 mm

Source · Traktorenlexikon, “Massey Ferguson MF 8130”

Which tractors compare with an MF 8130 A?

Within 10% of its 153.0 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an MF 8130 A two-wheel drive or four-wheel drive?

The Massey Ferguson MF 8130 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does an MF 8130 A have?

An MF 8130 A has a independent 540/540E/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Massey Ferguson MF 8130”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 8130CC BY-SA 4.0, WIKIBOOKS-TL-87636 · revision 992211. Wikibooks contributors (Traktorenlexikon). Original document