11 material differences · fewer than 12

Tractor oneCase-IH Magnum 72101994–1997No measured PTO figureTractor twoMassey Ferguson MF 8130 A1995–1999No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7210 and the MF 8130 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7210 and Massey Ferguson MF 8130 A, field by field
Field	Magnum 7210	MF 8130 A	Gap
Engine
Engine power, claimed claimed	153 hp	153.0 hp	—
Engine declared	CUMMINS 6 T-830	Perkins 1006.60 THR 4	differs
Displacement declared	8.27 L	5.99 L	+38% Magnum 7210
Maximum torque declared	471 lb·ft · 638 N·m	458 lb·ft · 621 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-immersed CASE-IH multi-plate clutch, nine plates with 228.5 mm diameter	Pedal-operated dry VALEO double clutch	differs
Hydraulics & hitch
Pump flow declared	29.1 gpm · 110 L/min	14.1 gpm · 53.3 L/min	+106% Magnum 7210
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift, at the coupling points declared	15,873 lb · 7,200 kg	12,434 lb · 5,640 kg	+28% Magnum 7210
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	16,590 lb · 7,525 kg	12,522 lb · 5,680 kg	+32% Magnum 7210
Maximum permissible mass declared	24,912 lb · 11,300 kg	25,353 lb · 11,500 kg	—
Wheelbase declared	118.3 in · 3,006 mm	109.3 in · 2,777 mm	+8% Magnum 7210
Length declared	208.3 in · 5,290 mm	199.7 in · 5,073 mm	—
Width declared	112.0–120.8 in · 2,845–3,069 mm	90.8–98.0 in · 2,306–2,488 mm	differs
Height, over the cab declared	117.4 in · 2,982 mm	115.8 in · 2,941 mm	—
Ground clearance declared	15.9 in · 404 mm	17.4 in · 442 mm	+9% MF 8130 A
Turning radius, braked declared	15.6 ft · 4.75 m	—	—
Fuel tank declared	380.4 qt · 360.0 L	238.8 qt · 226.0 L	+59% Magnum 7210

Source

Source