WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 2003–2012

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 6475A specs: hp, weight, years

Perkins 1106 C-60 TA six-cylinder diesel. The manufacturer claimed 133.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

133.3 hp

99.4 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 6475”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
13,140 lb
3-point lift
15,653 lb
Hyd. flow
27.2 gpm
Top speed
24.9–31.1 mph

Massey Ferguson 6475A specs: key facts

  • The Massey Ferguson 6475A was built from 2003 to 2012.

  • The Massey Ferguson 6475A has a claimed engine power (gross or net not stated) of 99.4 kW (133.3 hp); it has no measured PTO figure.

  • The Massey Ferguson 6475A was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 6475A has a Perkins 1106 C-60 TA engine, a 6-cylinder diesel unit.Source 2

  • The Massey Ferguson 6475A weighs 5,960 kg (13,140 lb) unladen.

  • The Massey Ferguson 6475A has a rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the Massey Ferguson 6475A lifts 7,100 kg (15,653 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 6475A delivers 103.0 L/min (27.2 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 6475”

How does the 6475A compare with its class?

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 244 tractors within 10% of its power, 11% carry one.

Derived by WhichTractor from 244 comparable records. How we work this out

Illustration of the 2003–2012 Massey Ferguson MF 6475 A, a 133 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 6475A have?

The only figure for the 6475A is 133.3 hp (99.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
133.3 hp

Source · Traktorenlexikon, “Massey Ferguson MF 6475”

What engine is in a 6475A?

A 6475A has a Perkins 1106 C-60 TA, a 6-cylinder diesel engine.

Engine — 6475A engine specifications
Make & modelPerkins 1106 C-60 TASource 2
Cylinders6, liquid-cooledSource 2
Max torque374 lb·ft · 507 N·m @ 1,400 rpm
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 6475”

How much will a 6475A lift, and what is its hydraulic flow?

A 6475A lifts 15,653 lb (7,100 kg) at the lower-link ends.

Hydraulics & PTO — 6475A hydraulics and PTO specifications
Pump flow27.2 gpm · 103.0 L/min
Pressure2,176 psi · 150 bar
Lift at ends15,653 lb · 7,100 kg
Rear PTO540 rpm / 1000 rpm @ 1,976 engine rpm

Source · Traktorenlexikon, “Massey Ferguson MF 6475”

What transmission does a 6475A have?

Transmission specifications for the 6475A are below.

Transmission — 6475A transmission specifications
ClutchElectro-hydraulically operated electronically controlled wet VALEO multi-disc clutch
SteeringHydrostatic DANFOSS steering type OSPC + OVR with double-acting synchronizing cylinder
Top speed24.9–31.1 mph · 40–50 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 6475”

How much does a 6475A weigh?

A 6475A weighs 13,140 lb (5,960 kg) unladen.

Weights & dimensions — 6475A weights and dimensions
Unladen weight13,140 lb · 5,960 kgtwo-wheel-drive version
Maximum permissible mass20,393 lb · 9,250 kg
Wheelbase112.1 in · 2,848 mmtwo-wheel-drive version
Length183.3 in · 4,656 mm
Width79.3–100.4 in · 2,014–2,550 mm
Height115.6 in · 2,935 mm
Ground clearance15.9 in · 403 mmtwo-wheel-drive version
Front track65.4–86.2 in · 1,660–2,190 mmtwo-wheel-drive version
Rear track54.1–86.8 in · 1,375–2,205 mm

Source · Traktorenlexikon, “Massey Ferguson MF 6475”

What oil does a 6475A take, and how much?

Fluid capacities for the 6475A are below.

6475A fluid capacities, grades and service intervals
SystemCapacity
Hydraulic75.0 qt · 71.0 LSource: Traktorenlexikon, “Massey Ferguson MF 6475” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 6475A?

Within 10% of its 133.3 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 6475A

Is a 6475A two-wheel drive or four-wheel drive?

The Massey Ferguson 6475A was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 6475A have?

A 6475A has a 540 rpm / 1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 7465”; and Traktorenlexikon, “Massey Ferguson MF 6475”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 6475 — CC BY-SA 4.0, WIKIBOOKS-TL-87410 · revision 992262. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 7465 — CC BY-SA 4.0, WIKIBOOKS-TL-71090 · revision 1031029. Wikibooks contributors (Traktorenlexikon). Original document