11 material differences · fewer than 12
Tractor oneJohn Deere 69101997–2003No measured PTO figureTractor twoMassey Ferguson MF 6475 A2003–2012No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6910 | MF 6475 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.3 hp | 133.3 hp | — |
| Engine declared | John Deere POWER-TECH 6.068 TLA 52 | Perkins 1106 C-60 TA | differs |
| Displacement declared | 6.79 L | — | — |
| Maximum torque declared | 423 lb·ft · 573 N·m | 374 lb·ft · 507 N·m | +13% 6910 |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Pedal-operated, hydraulic wet Perma-Clutch II designed as a multi-plate clutch | Electro-hydraulically operated electronically controlled wet VALEO multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 27.2 gpm · 103.0 L/min | — |
| Pressure declared | 435–3,002 psi · 30–207 bar | 2,176 psi · 150 bar | differs |
| Rear PTO speeds declared | 540E/540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,503 lb · 6,125 kg | 13,140 lb · 5,960 kg | — |
| Maximum permissible mass declared | 22,046 lb · 10,000 kg | 20,393 lb · 9,250 kg | +8% 6910 |
| Wheelbase declared | 104.3 in · 2,650 mm | 112.1 in · 2,848 mm | +7% MF 6475 A |
| Length declared | 179.6 in · 4,563 mm | 183.3 in · 4,656 mm | — |
| Width declared | 96.1 in · 2,440 mm | 79.3–100.4 in · 2,014–2,550 mm | differs |
| Height, over the cab declared | 113.7 in · 2,887 mm | 115.6 in · 2,935 mm | — |
| Ground clearance declared | 18.9 in · 480 mm | 15.9 in · 403 mm | +19% 6910 |
| Fuel tank declared | 264.2 qt · 250.0 L | 285.3 qt · 270.0 L | +8% MF 6475 A |
John Deere 6910 sources
Source
- Source: Traktorenlexikon, “John Deere 6910”
- Source: OECD test report 1824, 1999
Massey Ferguson MF 6475 A sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 6475”
- Source: Traktorenlexikon, “Massey Ferguson MF 7465”