• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1960–1962
  • 2,245 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

MAN 2P1 Full specifications

MAN D 8613 M 1/2 three-cylinder diesel. The manufacturer claimed 34.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

34.3 hp

25.6 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “MAN 2P1”, claimed

Weight
3,682 lb
Hyd. flow
4.2 gpm
Top speed
11.4–17.6 mph

MAN 2P1 specs: key facts

  • The MAN 2P1 was built from 1960 to 1962.

  • The MAN 2P1 has a claimed engine power (gross or net not stated) of 25.6 kW (34.3 hp); it has no measured PTO figure.

  • The MAN 2P1 is two-wheel drive (2WD).

  • The MAN 2P1 has a MAN D 8613 M 1/2 engine, a 3-cylinder 1.92 L diesel unit.

  • The MAN 2P1 weighs 1,670 kg (3,682 lb) unladen.

  • The MAN 2P1 has a rear PTO running at 540 rpm / 1000 rpm.

  • The hydraulic pump of the MAN 2P1 delivers 16 L/min (4.2 gpm).

Source · Traktorenlexikon, “MAN 2P1”

How much horsepower does a 2P1 have?

The only figure for the 2P1 is 34.3 hp (25.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
34.3 hp

Source · Traktorenlexikon, “MAN 2P1”

What engine is in a 2P1?

A 2P1 has an MAN D 8613 M 1/2, a 3-cylinder 1.92 L diesel engine.

Engine — 2P1 engine specifications
Make & modelMAN D 8613 M 1/2
Cylinders3, liquid-cooled
Displacement116.9 ci · 1.92 L

Source · Traktorenlexikon, “MAN 2P1”

How much will a 2P1 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 2P1 are below.

Hydraulics & PTO — 2P1 hydraulics and PTO specifications
Pump flow4.2 gpm · 16 L/min
Pressure2,134 psi · 147 bar
Rear PTO540 rpm / 1000 rpm

Source · Traktorenlexikon, “MAN 2P1”

What transmission does a 2P1 have?

Transmission specifications for the 2P1 are below.

Transmission — 2P1 transmission specifications
Clutchdry double clutch
SteeringMechanical ZF Gemmer steering, type: GC 37
Top speed11.4–17.6 mph · 18.4–28.3 km/h

Source · Traktorenlexikon, “MAN 2P1”

How much does a 2P1 weigh?

A 2P1 weighs 3,682 lb (1,670 kg) unladen.

Weights & dimensions — 2P1 weights and dimensions
Unladen weight3,682 lb · 1,670 kg
Wheelbase77.9 in · 1,978 mm
Length127.2 in · 3,230 mm
Width63.0 in · 1,600 mm
Height60.2 in · 1,530 mm
Ground clearance15.7 in · 400 mm
Front track49.6–59.4 in · 1,260–1,510 mm
Rear track50.4–57.9 in · 1,280–1,470 mm
Turning radius, braked9.8 ft · 3.00 m

Source · Traktorenlexikon, “MAN 2P1”

Which tractors compare with a 2P1?

Within 10% of its 34.3 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 2P1 two-wheel drive or four-wheel drive?

The MAN 2P1 is two-wheel drive (2WD).

What PTO does a 2P1 have?

A 2P1 has a 540 rpm / 1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “MAN 2P1”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: MAN 2P1CC BY-SA 4.0, WIKIBOOKS-TL-51547 · revision 956954. Wikibooks contributors (Traktorenlexikon). Original document