7 material differences · fewer than 12
Tractor oneKramer KL 3501966–1968No measured PTO figureTractor twoMAN 2P11960–1962No measured PTO figure
Which should you choose?
Read our verdict on the KL 350 and the 2P1 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | KL 350 | 2P1 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.3 hp | 34.3 hp | — |
| Engine declared | KHD F3L 812/S | MAN D 8613 M 1/2 | differs |
| Displacement declared | 2.55 L | 1.92 L | +33% KL 350 |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 11.4–17.6 mph · 18.4–28.3 km/h | differs |
| Clutch declared | — | dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.1 gpm · 27.0 L/min | 4.2 gpm · 16 L/min | +69% KL 350 |
| Pressure declared | 2,176 psi · 150 bar | 2,134 psi · 147 bar | — |
| Rear PTO speeds declared | 1245 | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,101 lb · 1,860 kg | 3,682 lb · 1,670 kg | +11% KL 350 |
| Maximum permissible mass declared | 5,622 lb · 2,550 kg | — | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 77.9 in · 1,978 mm | — |
| Length declared | 131.1 in · 3,330 mm | 127.2 in · 3,230 mm | — |
| Width declared | 61.0 in · 1,550 mm | 63.0 in · 1,600 mm | — |
| Ground clearance declared | 13.4 in · 340 mm | 15.7 in · 400 mm | +18% 2P1 |
| Turning radius, braked declared | — | 9.8 ft · 3.00 m | — |
| Fuel tank declared | 37.0 qt · 35 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Kramer KL 350 sources
Source
- Source: Traktorenlexikon, “Kramer KL 350”
MAN 2P1 sources
Source
- Source: Traktorenlexikon, “MAN 2P1”