- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1967–1969
- 2,802 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Güldner G 35 (S) Full specifications
Güldner 3 L 79 three-cylinder diesel. The manufacturer claimed 34.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
34.3 hp
25.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Güldner G 35”, claimed
- Weight
- 4,178 lb
- 3-point lift
- 3,417 lb
- Top speed
- 12.4 mph
Güldner G 35 (S) specs: key facts
The Güldner G 35 (S) was built from 1967 to 1969.
The Güldner G 35 (S) has a claimed engine power (gross or net not stated) of 25.6 kW (34.3 hp); it has no measured PTO figure.
The Güldner G 35 (S) is two-wheel drive (2WD).
The Güldner G 35 (S) has a Güldner 3 L 79 engine, a 3-cylinder 2.36 L diesel unit.Source 2
The Güldner G 35 (S) weighs 1,895 kg (4,178 lb) unladen.
The Güldner G 35 (S) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Güldner G 35 (S) lifts 1,550 kg (3,417 lb) at the lower-link ends.
Source · Traktorenlexikon, “Güldner G 35”
How much horsepower does a G 35 (S) have?
The only figure for the G 35 (S) is 34.3 hp (25.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Güldner G 35”
What engine is in a G 35 (S)?
A G 35 (S) has a Güldner 3 L 79, a 3-cylinder 2.36 L diesel engine.
| Make & model | Güldner 3 L 79 |
|---|---|
| Cylinders | 3, air-cooledSource 1 |
| Displacement | 143.8 ci · 2.36 L |
| Max torque | 95 lb·ft · 128 N·mSource 1 |
Source · Traktorenlexikon, “Güldner G 40 Toledo”
How much will a G 35 (S) lift?
A G 35 (S) lifts 3,417 lb (1,550 kg) at the lower-link ends.
| Pressure | 2,134 psi · 147 bar |
|---|---|
| Lift at ends | 3,417 lb · 1,550 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm |
| PTO shaft | 29 x 34,9 x 8,7 mm (Form A) |
Source · Traktorenlexikon, “Güldner G 35”
What transmission does a G 35 (S) have?
Transmission specifications for the G 35 (S) are below.
| Clutch | Pedal-operated dry double clutch by Fichtel & Sachs |
|---|---|
| Steering | ZF-Gemmer steering, type: GD 28 a |
| Top speed | 12.4 mph · 20 km/hS)30 |
Source · Traktorenlexikon, “Güldner G 35”
How much does a G 35 (S) weigh?
A G 35 (S) weighs 4,178 lb (1,895 kg) unladen.
| Unladen weight | 4,178 lb · 1,895 kg |
|---|---|
| Maximum permissible mass | 7,055 lb · 3,200 kg |
| Maximum front axle load | 2,756 lb · 1,250 kg |
| Maximum rear axle load | 5,291 lb · 2,400 kg |
| Wheelbase | 76.9 in · 1,954 mm |
| Length | 128.0 in · 3,250 mm |
| Width | 65.4 in · 1,662 mm |
| Height | 59.4 in · 1,510 mm |
| Ground clearance | 15.7 in · 400 mm |
| Front track | 53.5 in · 1,360 mmWikibooks gives one track for both axles |
| Rear track | 53.5 in · 1,360 mmWikibooks gives one track for both axles |
| Turning radius, braked | 10.3 ft · 3.15 m |
Source · Traktorenlexikon, “Güldner G 35”
Which tractors compare with a G 35 (S)?
Within 10% of its 34.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- Schlüter Super 350 / 350 V34.3 hp engine, claimed · 1967–1972Side by side with the G 35 (S) →
- Hermann Lanz D 634 L34.3 hp engine, claimed · 1977–1980Side by side with the G 35 (S) →
- ZETOR 3511/354534.5 hp engine, claimed · 1967–1972Side by side with the G 35 (S) →
- Fiat 400 (DT)34.5 hp engine, claimed · 1968–1974Side by side with the G 35 (S) →
- International Harvester F-267 D34.5 hp engine, claimed · 1961Side by side with the G 35 (S) →
- International Harvester FU-267 D34.5 hp engine, claimed · 1961Side by side with the G 35 (S) →
Everything else people ask
Is a G 35 (S) two-wheel drive or four-wheel drive?
The Güldner G 35 (S) is two-wheel drive (2WD).
What PTO does a G 35 (S) have?
A G 35 (S) has a independent 540/1000 rpm rear PTO on a 29 x 34,9 x 8,7 mm (Form A) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Güldner G 40 Toledo”; and Traktorenlexikon, “Güldner G 35”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Güldner G 35 — CC BY-SA 4.0, WIKIBOOKS-TL-43401 · revision 1000181. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Güldner G 40 Toledo — CC BY-SA 4.0, WIKIBOOKS-TL-43394 · revision 1078737. Wikibooks contributors (Traktorenlexikon). Original document