- Rigid chassis
- WhichTractor size: Standard-size
- Lab tested ×1
- 2002–2005
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
John Deere 8320 T Hydraulics & PTO specifications
20 hydraulics and PTO values on record for the 8320 T.
Engine power, claimed · gross or net not stated
247 hp
184 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere 8320T”, claimed
How much will an 8320 T lift?
An 8320 T lifts 16,535 lb (7,500 kg) at the lower-link ends.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Hydraulic control | Load sensing |
| Pump flow | 34.6 gpm · 131.0 L/min |
| Hydraulic pressure | 2,944 psi · 203 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 16,535 lb · 7,500 kg |
Source · Traktorenlexikon, “John Deere 8320T”
What PTO does an 8320 T have?
An 8320 T has a 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/4"- 20 teilig |
Source · Traktorenlexikon, “John Deere 8320T”
How much power does an 8320 T deliver at the PTO?
On OECD Test 2043, the 8320 T delivered 246.6 hp (183.9 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 246.6 hp · 183.9 kWAt 917 PTO rpmAt 2,000 engine rpm |
|---|---|
| PTO power, at rated engine speed | 217.6 hp · 162.3 kWAt 1,009 PTO rpmAt 2,200 engine rpm |
| PTO power, at standard PTO speed | 217.6 hp · 162.3 kWAt 1,009 PTO rpmAt 2,200 engine rpm |
| PTO shaft speed, at maximum power | 917 rpm |
| PTO shaft speed, at rated engine speed | 1,009 rpm |
| PTO shaft speed, at standard PTO speed | 1,009 rpm |
| Hydraulic power, at maximum power | 49.8 hp · 37.1 kW |
| Hydraulic pump delivery, at maximum power | 34.2 gpm · 129.5 L/min |
| Three-point lift force | 15,242 lbf · 67.8 kN |
Source · OECD test report 2043, 2003
Where this page comes from
20 hydraulics and PTO values from OECD test report 2043, 2003; and Traktorenlexikon, “John Deere 8320T”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 043: John Deere 8320T — Licence not stated by the publisher; facts cited, OECD-2043 · published 2003-02-06 · retrieved 2026-09-14. OECD. Original document
- Traktorenlexikon: John Deere 8320T — CC BY-SA 4.0, WIKIBOOKS-TL-106544 · revision 880808. Wikibooks contributors (Traktorenlexikon). Original document