• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 2000–2002

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere 8110T specs: hp, weight, years

John Deere-PowerTech 6.081 HRW six-cylinder diesel. The manufacturer claimed 192.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

192.4 hp

143.5 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 8110T”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
23,649 lb
3-point lift
10,971 lb
Hyd. flow
31.8 gpm
Top speed
18.6 mph

John Deere 8110T specs: key facts

  • The John Deere 8110T was built from 2000 to 2002.

  • The John Deere 8110T has a claimed engine power (gross or net not stated) of 143.5 kW (192.4 hp); it has no measured PTO figure.

  • The John Deere 8110T is a tracked machine.

  • The John Deere 8110T has a John Deere-PowerTech 6.081 HRW engine, a 6-cylinder 8.13 L diesel unit.

  • The John Deere 8110T weighs 10,727 kg (23,649 lb) unladen.

  • The John Deere 8110T has an independent rear PTO running at 1000 rpm.

  • The three-point hitch of the John Deere 8110T lifts 4,976 kg (10,971 lb) at the lower-link ends.

  • The hydraulic pump of the John Deere 8110T delivers 120.4 L/min (31.8 gpm).

Source · Traktorenlexikon, “John Deere 8110T”

How does the 8110T compare with its class?

  • Worth knowing:

    An unladen mass of 10,727 kg is high for its class — 37% above the median of 7,802 kg across the 132 machines within 10% of its power that hold this figure.

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 132 tractors within 10% of its power, 14% carry one.

Derived by WhichTractor from 132 comparable records. How we work this out

Illustration of the 2000–2002 John Deere 8110 T, a 192 hp crawler tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does an 8110T have?

The only figure for the 8110T is 192.4 hp (143.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
192.4 hp

Source · Traktorenlexikon, “John Deere 8110T”

What engine is in an 8110T?

An 8110T has a John Deere-PowerTech 6.081 HRW, a 6-cylinder 8.13 L diesel engine.

Engine — 8110T engine specifications
Make & modelJohn Deere-PowerTech 6.081 HRW
Cylinders6, liquid-cooled
Displacement496.4 ci · 8.13 L
Max torque586 lb·ft · 794 N·m @ 1,000 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “John Deere 8110T”

How much will an 8110T lift, and what is its hydraulic flow?

An 8110T lifts 10,971 lb (4,976 kg) at the lower-link ends.

Hydraulics & PTO — 8110T hydraulics and PTO specifications
SystemLoad sensing
Pump flow31.8 gpm · 120.4 L/min
Pressure3,379 psi · 233 bar
Lift at ends10,971 lb · 4,976 kg
Rear PTOIndependent, engine-driven, 1000 rpmEngages under load
PTO shaft1 3/8"- 20 teilig

Source · Traktorenlexikon, “John Deere 8110T”

What transmission does an 8110T have?

Transmission specifications for the 8110T are below.

Transmission — 8110T transmission specifications
ClutchPedal operated hydraulic wet John Deere multi-plate clutch
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “John Deere 8110T”

How much does an 8110T weigh?

An 8110T weighs 23,649 lb (10,727 kg) unladen.

Weights & dimensions — 8110T weights and dimensions
Unladen weight23,649 lb · 10,727 kg
Maximum permissible mass31,500 lb · 14,288 kg
Wheelbase89.0 in · 2,260 mm
Length216.0 in · 5,487 mm
Width134.0–136.0 in · 3,404–3,454 mm
Height123.4 in · 3,135 mm
Ground clearance14.2 in · 360 mm
Front track88.0–119.5 in · 2,235–3,035 mmWikibooks gives one track for both axles
Rear track88.0–119.5 in · 2,235–3,035 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “John Deere 8110T”

What oil does an 8110T take, and how much?

An 8110T engine takes 22.7 qt (21.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

8110T fluid capacities, grades and service intervals
SystemCapacity
Engine oil22.7 qt · 21.5 LSource: Traktorenlexikon, “John Deere 8110T” · single source, not independently verified
Hydraulic259.9 qt · 246.0 LSource: Traktorenlexikon, “John Deere 8110T” · single source, not independently verified
Cooling system35.9 qt · 34.0 LSource: Traktorenlexikon, “John Deere 8110T” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 8110T?

Within 10% of its 192.4 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the John Deere 8110T

Is an 8110T two-wheel drive or four-wheel drive?

The John Deere 8110T is a tracked machine.

What PTO does an 8110T have?

An 8110T has a independent 1000 rpm rear PTO on a 1 3/8"- 20 teilig shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “John Deere 8110T”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere 8110T — CC BY-SA 4.0, WIKIBOOKS-TL-106394 · revision 878400. Wikibooks contributors (Traktorenlexikon). Original document