9 material differences · fewer than 12
Tractor oneJohn Deere 81101999–2002No measured PTO figureTractor twoJohn Deere 8110 T2000–2002No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (4WD; Tracks); the 8110 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 8110 | 8110 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 192.4 hp | 192.4 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-11 | John Deere-PowerTech 6.081 HRW | differs |
| Displacement declared | 8.13 L | 8.13 L | — |
| Maximum torque declared | 586 lb·ft · 794 N·m | 586 lb·ft · 794 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated hydraulic wet John Deere multi-disc clutch | Pedal operated hydraulic wet John Deere multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 31.8 gpm · 120.4 L/min | 31.8 gpm · 120.4 L/min | — |
| Pressure declared | 2,683 psi · 185 bar | 3,379 psi · 233 bar | +26% 8110 T |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 19,346 lb · 8,775 kg | 23,649 lb · 10,727 kg | +22% 8110 T |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 31,500 lb · 14,288 kg | — |
| Wheelbase declared | 116.1 in · 2,950 mm | 89.0 in · 2,260 mm | +31% 8110 |
| Length declared | 216.0 in · 5,487 mm | 216.0 in · 5,487 mm | — |
| Width declared | 118.6–127.3 in · 3,012–3,233 mm | 134.0–136.0 in · 3,404–3,454 mm | differs |
| Height, over the cab declared | 121.7 in · 3,090 mm | 123.4 in · 3,135 mm | — |
| Ground clearance declared | 16.5 in · 420 mm | 14.2 in · 360 mm | +17% 8110 |
| Fuel tank declared | 540.0 qt · 511.0 L | 519.9 qt · 492.0 L | — |
John Deere 8110 sources
Source
- Source: Traktorenlexikon, “John Deere 8110”
- Source: OECD test report 1931, 2000
John Deere 8110 T sources
Source
- Source: Traktorenlexikon, “John Deere 8110T”