• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1986–1993

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere 3050 (A) specs: hp, weight, years

John Deere 6.359 DL-008 six-cylinder diesel. The manufacturer claimed 90.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

90.8 hp

67.7 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 3050”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
8,642 lb
3-point lift
9,978 lb
Hyd. flow
13.8 gpm
Top speed
18.6–24.9 mph

John Deere 3050 (A) specs: key facts

  • The John Deere 3050 (A) was built from 1986 to 1993.

  • The John Deere 3050 (A) has a claimed engine power (gross or net not stated) of 67.7 kW (90.8 hp); it has no measured PTO figure.

  • The John Deere 3050 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The John Deere 3050 (A) has a John Deere 6.359 DL-008 engine, a 6-cylinder 5.88 L diesel unit.

  • The John Deere 3050 (A) weighs 3,920 kg (8,642 lb) unladen.

  • The John Deere 3050 (A) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the John Deere 3050 (A) lifts 4,526 kg (9,978 lb) at the lower-link ends.

  • The hydraulic pump of the John Deere 3050 (A) delivers 52.3 L/min (13.8 gpm).

Source · Traktorenlexikon, “John Deere 3050”

How does the 3050 (A) compare with its class?

  • Limitation:

    Eight forward gears is low for its class — 47% below the median of 15 across the 380 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 391 comparable records. How we work this out

Illustration of the 1986–1993 John Deere 3050 (A), a 91 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 3050 (A) have?

The only figure for the 3050 (A) is 90.8 hp (67.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
90.8 hp

Source · Traktorenlexikon, “John Deere 3050”

What engine is in a 3050 (A)?

A 3050 (A) has a John Deere 6.359 DL-008, a 6-cylinder 5.88 L diesel engine.

Engine — 3050 (A) engine specifications
Make & modelJohn Deere 6.359 DL-008
Cylinders6, liquid-cooled
Displacement359.0 ci · 5.88 L
Max torque251 lb·ft · 340 N·m @ 1,400 rpm

Source · Traktorenlexikon, “John Deere 3050”

How much will a 3050 (A) lift, and what is its hydraulic flow?

A 3050 (A) lifts 9,978 lb (4,526 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 3050 (A) hydraulics and PTO specifications
SystemClosed centre
Pump flow13.8 gpm · 52.3 L/min
Pressure3,336 psi · 230 bar
Hitch categoryCategory 2
Lift at ends9,978 lb · 4,526 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,071 engine rpmEngages under load

Source · Traktorenlexikon, “John Deere 3050”

What transmission does a 3050 (A) have?

Transmission specifications for the 3050 (A) are below.

Transmission — 3050 (A) transmission specifications
BrakesPedal-operated hydraulic wet annular piston disc brake acting on differential side shafts
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “John Deere 3050”

How much does a 3050 (A) weigh?

A 3050 (A) weighs 8,642 lb (3,920 kg) unladen.

Weights & dimensions — 3050 (A) weights and dimensions
Unladen weight8,642 lb · 3,920 kgtwo-wheel-drive version
Maximum permissible mass14,771 lb · 6,700 kg
Maximum rear axle load11,464 lb · 5,200 kg
Wheelbase100.4 in · 2,551 mmtwo-wheel-drive version
Length188.5 in · 4,787 mm
Width83.8 in · 2,129 mm
Height116.7 in · 2,964 mm
Ground clearance25.6 in · 650 mmtwo-wheel-drive version
Front track56.8–82.3 in · 1,442–2,090 mmtwo-wheel-drive version
Rear track59.1–78.7 in · 1,500–2,000 mm

Source · Traktorenlexikon, “John Deere 3050”

What oil does a 3050 (A) take, and how much?

A 3050 (A) engine takes 12.7 qt (12.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

3050 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil12.7 qt · 12.0 LSource: Traktorenlexikon, “John Deere 3050” · single source, not independently verified
Transmission & hydraulic50.7 qt · 48.0 LSource: Traktorenlexikon, “John Deere 3050” · single source, not independently verified
Front axle6.9 qt · 6.5 LSource: Traktorenlexikon, “John Deere 3050” · single source, not independently verified
Cooling system18.0 qt · 17.0 LSource: Traktorenlexikon, “John Deere 3050” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 3050 (A)?

Within 10% of its 90.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the John Deere 3050 (A)

Is a 3050 (A) two-wheel drive or four-wheel drive?

The John Deere 3050 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 3050 (A) have?

A 3050 (A) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “John Deere 3050”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere 3050 — CC BY-SA 4.0, WIKIBOOKS-TL-49314 · revision 978550. Wikibooks contributors (Traktorenlexikon). Original document