- Vehicle type: unspecified
- WhichTractor size: Utility
- Not independently tested
- 1937–1938
- 115 built
It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
J.I. Case Case CCS Full specifications
The manufacturer claimed 27.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
27.1 hp
20.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case CCS”, claimed
- Weight
- 4,134 lb
- Top speed
- 11.0 mph
J.I. Case Case CCS specs: key facts
The J.I. Case Case CCS was built from 1937 to 1938.
The J.I. Case Case CCS has a claimed engine power (gross or net not stated) of 20.2 kW (27.1 hp); it has no measured PTO figure.
The J.I. Case Case CCS is two-wheel drive (2WD).
The J.I. Case Case CCS weighs 1,875 kg (4,134 lb) unladen.
The J.I. Case Case CCS has a rear PTO running at 535 rpm.
Source · Traktorenlexikon, “Case CCS”
How much horsepower does a Case CCS have?
The only figure for the Case CCS is 27.1 hp (20.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case CCS”
How much will a Case CCS lift?
Hydraulic and PTO specifications for the Case CCS are below.
| Rear PTO | transmission-driven, 535 rpm |
|---|
Source · Traktorenlexikon, “Case CCS”
What transmission does a Case CCS have?
Transmission specifications for the Case CCS are below.
| Clutch | Hand lever operated double disc clutch, located inside the pulley |
|---|---|
| Steering | Mechanical steering |
| Top speed | 11.0 mph · 17.7 km/h |
Source · Traktorenlexikon, “Case CCS”
How much does a Case CCS weigh?
A Case CCS weighs 4,134 lb (1,875 kg) unladen.
| Unladen weight | 4,134 lb · 1,875 kg |
|---|---|
| Wheelbase | 87.2 in · 2,216 mm |
| Length | 114.0 in · 2,896 mm |
| Width | 60.0 in · 1,524 mm |
| Height | 53.0 in · 1,346 mm |
| Ground clearance | 30.0 in · 762 mm |
| Rear track | 70.0 in · 1,778 mm |
Source · Traktorenlexikon, “Case CCS”
Which tractors compare with a Case CCS?
Within 10% of its 27.1 hp of claimed engine power, the same type, and first built within 15 years of it.
- Kramer K 2827.5 hp engine, claimed · 1947–1950Side by side with the Case CCS →
- Hermann Lanz D 28 (TD)27.5 hp engine, claimed · 1948–1952Side by side with the Case CCS →
- Hürlimann D-5027.6 hp engine, claimed · 1948–1952Side by side with the Case CCS →
- RÖHR R 2827.6 hp engine, claimed · 1948–1949Side by side with the Case CCS →
- BOLINDER-MUNKTELL BM-24/BM-2527.6 hp engine, claimed · 1952–1959Side by side with the Case CCS →
- ALLIS-CHALMERS Modell-U25.6 hp engine, claimed · 1929–1952Side by side with the Case CCS →
Everything else people ask
Is a Case CCS two-wheel drive or four-wheel drive?
The J.I. Case Case CCS is two-wheel drive (2WD).
What PTO does a Case CCS have?
A Case CCS has a 535 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case CCS”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case CCS — CC BY-SA 4.0, WIKIBOOKS-TL-115197 · revision 969678. Wikibooks contributors (Traktorenlexikon). Original document