• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1969–1978
  • 8,542 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 970 Full specifications

CASE A-401 six-cylinder. The manufacturer claimed 85.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

85.7 hp

63.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 970”, claimed

Weight
10,185 lb
Hyd. flow
16.0 gpm
Top speed
15.5–18.6 mph

J.I. Case 970 specs: key facts

  • The J.I. Case 970 was built from 1969 to 1978.

  • The J.I. Case 970 has a claimed engine power (gross or net not stated) of 63.9 kW (85.7 hp); it has no measured PTO figure.

  • The J.I. Case 970 is two-wheel drive (2WD).

  • The J.I. Case 970 has a CASE A-401 engine, a 6-cylinder unit.

  • The J.I. Case 970 weighs 4,620 kg (10,185 lb) unladen.

  • The J.I. Case 970 has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the J.I. Case 970 delivers 60.6 L/min (16.0 gpm).

Source · Traktorenlexikon, “Case 970”

How much horsepower does a 970 have?

The only figure for the 970 is 85.7 hp (63.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
85.7 hp

Source · Traktorenlexikon, “Case 970”

What engine is in a 970?

A 970 has a CASE A-401, a 6-cylinder engine.

Engine — 970 engine specifications
Make & modelCASE A-401
Cylinders6, liquid-cooled
Electrical system12 V

Source · Traktorenlexikon, “Case 970”

How much will a 970 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 970 are below.

Hydraulics & PTO — 970 hydraulics and PTO specifications
Pump flow16.0 gpm · 60.6 L/min
Hitch categoryCategory 2
Rear PTO540/1000 rpm

Source · Traktorenlexikon, “Case 970”

What transmission does a 970 have?

Transmission specifications for the 970 are below.

Transmission — 970 transmission specifications
BrakesPedal-operated hydraulic twin-disc brake acting on differential side shafts
SteeringHydrostatic steering with separate oil circuit
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case 970”

How much does a 970 weigh?

A 970 weighs 10,185 lb (4,620 kg) unladen.

Weights & dimensions — 970 weights and dimensions
Unladen weight10,185 lb · 4,620 kg
Wheelbase108.0 in · 2,743 mmRC: 2,565
Length162.0 in · 4,115 mm
Width88.0 in · 2,235 mm
Height78.0 in · 1,981 mm
Ground clearance15.0 in · 381 mm
Front track62.0–90.0 in · 1,575–2,286 mm
Rear track62.0–88.0 in · 1,575–2,235 mm
Turning radius, braked13.6 ft · 4.14 m

Source · Traktorenlexikon, “Case 970”

Which tractors compare with a 970?

Within 10% of its 85.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 970 two-wheel drive or four-wheel drive?

The J.I. Case 970 is two-wheel drive (2WD).

What PTO does a 970 have?

A 970 has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 970”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 970CC BY-SA 4.0, WIKIBOOKS-TL-115344 · revision 989864. Wikibooks contributors (Traktorenlexikon). Original document