• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1969–1973
  • 3,238 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 870 Full specifications

CASE A-336 four-cylinder. The manufacturer claimed 70.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

70.7 hp

52.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 870”, claimed

Weight
9,204 lb
Hyd. flow
16.0 gpm
Top speed
15.5–18.6 mph

J.I. Case 870 specs: key facts

  • The J.I. Case 870 was built from 1969 to 1973.

  • The J.I. Case 870 has a claimed engine power (gross or net not stated) of 52.7 kW (70.7 hp); it has no measured PTO figure.

  • The J.I. Case 870 is two-wheel drive (2WD).

  • The J.I. Case 870 has a CASE A-336 engine, a 4-cylinder unit.

  • The J.I. Case 870 weighs 4,175 kg (9,204 lb) unladen.

  • The J.I. Case 870 has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the J.I. Case 870 delivers 60.6 L/min (16.0 gpm).

Source · Traktorenlexikon, “Case 870”

How much horsepower does an 870 have?

The only figure for the 870 is 70.7 hp (52.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
70.7 hp

Source · Traktorenlexikon, “Case 870”

What engine is in an 870?

An 870 has a CASE A-336, a 4-cylinder engine.

Engine — 870 engine specifications
Make & modelCASE A-336
Cylinders4, liquid-cooled
Electrical system12 V

Source · Traktorenlexikon, “Case 870”

How much will an 870 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 870 are below.

Hydraulics & PTO — 870 hydraulics and PTO specifications
Pump flow16.0 gpm · 60.6 L/min
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,900 engine rpm

Source · Traktorenlexikon, “Case 870”

What transmission does an 870 have?

Transmission specifications for the 870 are below.

Transmission — 870 transmission specifications
SteeringHydrostatic steering with separate oil circuit
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case 870”

How much does an 870 weigh?

An 870 weighs 9,204 lb (4,175 kg) unladen.

Weights & dimensions — 870 weights and dimensions
Unladen weight9,204 lb · 4,175 kg
Wheelbase101.0 in · 2,565 mm
Length153.0 in · 3,886 mm
Width88.0 in · 2,235 mm
Height67.0 in · 1,702 mm
Ground clearance15.0 in · 381 mm
Front track60.0–88.0 in · 1,524–2,235 mmWikibooks gives one track for both axles
Rear track60.0–88.0 in · 1,524–2,235 mmWikibooks gives one track for both axles
Turning radius, braked11.4 ft · 3.48 m

Source · Traktorenlexikon, “Case 870”

Which tractors compare with an 870?

Within 10% of its 70.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an 870 two-wheel drive or four-wheel drive?

The J.I. Case 870 is two-wheel drive (2WD).

What PTO does an 870 have?

An 870 has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 870”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 870CC BY-SA 4.0, WIKIBOOKS-TL-115343 · revision 1001598. Wikibooks contributors (Traktorenlexikon). Original document