- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1960–1969
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
J.I. Case 731 Full specifications
The manufacturer claimed 57.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
57.9 hp
43.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 731”, claimed
- Weight
- 6,956 lb
- Hyd. flow
- 15.6 gpm
- Top speed
- 18.6 mph
J.I. Case 731 specs: key facts
The J.I. Case 731 was built from 1960 to 1969.
The J.I. Case 731 has a claimed engine power (gross or net not stated) of 43.2 kW (57.9 hp); it has no measured PTO figure.
The J.I. Case 731 is two-wheel drive (2WD).
The J.I. Case 731 weighs 3,155 kg (6,956 lb) unladen.
The J.I. Case 731 has an independent rear PTO running at 540/1000 rpm.
The hydraulic pump of the J.I. Case 731 delivers 59.0 L/min (15.6 gpm).
Source · Traktorenlexikon, “Case 731”
How much horsepower does a 731 have?
The only figure for the 731 is 57.9 hp (43.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 731”
How much will a 731 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 731 are below.
| Pump flow | 15.6 gpm · 59.0 L/min |
|---|---|
| Hitch category | Category 1 |
| Rear PTO | Independent, engine-driven, 540/1000 rpm |
Source · Traktorenlexikon, “Case 731”
What transmission does a 731 have?
Transmission specifications for the 731 are below.
| Brakes | Pedal-operated double disc brake acting on rear wheels |
|---|---|
| Steering | Mechanical steering with ball head suspension incl. hydraulic power assistance |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Case 731”
How much does a 731 weigh?
A 731 weighs 6,956 lb (3,155 kg) unladen.
| Unladen weight | 6,956 lb · 3,155 kg |
|---|---|
| Wheelbase | 101.7 in · 2,584 mm |
| Length | 143.4 in · 3,642 mm |
| Width | 85.2 in · 2,165 mm |
| Height | 65.9 in · 1,674 mm |
| Ground clearance | 20.0 in · 508 mm |
| Rear track | 52.0–88.0 in · 1,321–2,235 mm |
| Turning radius, braked | 11.9 ft · 3.63 m |
Source · Traktorenlexikon, “Case 731”
Which tractors compare with a 731?
Within 10% of its 55.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 73055.7 hp PTO, claimed · 1960–1969Side by side with the 731 →
- Leyland 27056.1 hp PTO, claimed · 1973–1975Side by side with the 731 →
- Lamborghini R-365 (DT)55.3 hp PTO, claimed · 1971–1973Side by side with the 731 →
- David Brown 1200 Selectmatic56.2 hp PTO, claimed · 1967–1971Side by side with the 731 →
- International Harvester 624 (A)55.2 hp PTO, claimed · 1965–1972Side by side with the 731 →
- Fiat 650-S (DT)55.2 hp PTO, claimed · 1971–1974Side by side with the 731 →
Everything else people ask
Is a 731 two-wheel drive or four-wheel drive?
The J.I. Case 731 is two-wheel drive (2WD).
What PTO does a 731 have?
A 731 has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 731”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 731 — CC BY-SA 4.0, WIKIBOOKS-TL-115292 · revision 989840. Wikibooks contributors (Traktorenlexikon). Original document