3 material differences · fewer than 12

Tractor oneJ.I. Case 7301960–1969No measured PTO figureTractor twoJ.I. Case 7311960–1969No measured PTO figure

Which should you choose?

Read our verdict on the 730 and the 731 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

3 material differences · 8 fields identical or within 5%, which is not counted as material

J.I. Case 730 and J.I. Case 731, field by field
Field730731Gap
Engine
Engine power, claimed claimed57.9 hp57.9 hp—
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Hydraulics & hitch
Pump flow declared15.5 gpm · 58.7 L/min15.6 gpm · 59.0 L/min—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared7,000 lb · 3,175 kg6,956 lb · 3,155 kg—
Wheelbase declared102.0 in · 2,591 mm101.7 in · 2,584 mm—
Length declared156.0 in · 3,962 mm143.4 in · 3,642 mm+9% 730
Width declared88.0 in · 2,235 mm85.2 in · 2,165 mm—
Ground clearance declared15.0 in · 381 mm20.0 in · 508 mm+33% 731
Turning radius, braked declared7.1 ft · 2.16 m11.9 ft · 3.63 m+68% 731
Fuel tank declared69.2 qt · 65.5 L69.2 qt · 65.5 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 730 sources

Source
  • Source: Traktorenlexikon, “Case 730”

J.I. Case 731 sources

Source
  • Source: Traktorenlexikon, “Case 731”