9 material differences · fewer than 12
Tractor oneJ.I. Case 610-B1958–1959No measured PTO figureTractor twoMassey Ferguson MF 154 (A)1973–1983No measured PTO figure
Which should you choose?
Read our verdict on the 610-B and the MF 154 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 610-B | MF 154 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 50.0 hp | +13% MF 154 (A) |
| Engine declared | CASE 164 | Perkins AD 3.152 S | differs |
| Displacement declared | 2.70 L | 2.50 L | +8% 610-B |
| Maximum torque declared | — | 127 lb·ft · 173 N·m | — |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Pedal-operated CASE single-plate clutch, in conjunction with pedal valve-operated torque converter | Pedal operated dry and air cooled LUK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 3.0 gpm · 11.4 L/min | 7.1 gpm · 27.0 L/min | +137% MF 154 (A) |
| Pressure declared | — | 2,418 psi · 166.7 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,008 lb · 1,818 kg | 4,475 lb · 2,030 kg | +12% MF 154 (A) |
| Wheelbase declared | 78.5 in · 1,994 mm | 81.9 in · 2,080 mm | — |
| Length declared | 121.5 in · 3,086 mm | 138.6 in · 3,520 mm | +14% MF 154 (A) |
| Width declared | 63.3 in · 1,608 mm | — | — |
| Ground clearance declared | — | 12.6 in · 320 mm | — |
| Turning radius, braked declared | — | 10.9 ft · 3.31 m | — |
| Fuel tank declared | 55.2 qt · 52.2 L | 65.5 qt · 62.0 L | +19% MF 154 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
J.I. Case 610-B sources
- Source: Traktorenlexikon, “Case 610-B”
- Source: Traktorenlexikon, “Case 511-B”
Massey Ferguson MF 154 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 154”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”