• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1979–1983
  • 2,716 built

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 4890 Full specifications

SAAB-SCANIA 11-L six-cylinder diesel. The manufacturer claimed 296.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

296.0 hp

220.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 4890”, claimed

Weight
25,750 lb
Hyd. flow
24.0 gpm
Top speed
18.6 mph

J.I. Case 4890 specs: key facts

  • The J.I. Case 4890 was built from 1979 to 1983.

  • The J.I. Case 4890 has a claimed engine power (gross or net not stated) of 220.7 kW (296.0 hp); it has no measured PTO figure.

  • The J.I. Case 4890 is four-wheel drive (4WD).

  • The J.I. Case 4890 has a SAAB-SCANIA 11-L engine, a 6-cylinder 8.26 L diesel unit.

  • The J.I. Case 4890 weighs 11,680 kg (25,750 lb) unladen.

  • The J.I. Case 4890 has an independent rear PTO running at 1000 rpm.

  • The hydraulic pump of the J.I. Case 4890 delivers 90.8 L/min (24.0 gpm).

Source · Traktorenlexikon, “Case 4890”

How much horsepower does a 4890 have?

The only figure for the 4890 is 296.0 hp (220.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
296.0 hp

Source · Traktorenlexikon, “Case 4890”

What engine is in a 4890?

A 4890 has a SAAB-SCANIA 11-L, a 6-cylinder 8.26 L diesel engine.

Engine — 4890 engine specifications
Make & modelSAAB-SCANIA 11-L
Cylinders6, liquid-cooled
Displacement504.2 ci · 8.26 L
Max torque487 lb·ft · 660 N·m @ 1,400 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case 4890”

How much will a 4890 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 4890 are below.

Hydraulics & PTO — 4890 hydraulics and PTO specifications
Pump flow24.0 gpm · 90.8 L/min
Hitch categoryCategory 3
Rear PTOIndependent, engine-driven, 1000 rpm

Source · Traktorenlexikon, “Case 4890”

What transmission does a 4890 have?

Transmission specifications for the 4890 are below.

Transmission — 4890 transmission specifications
ClutchHydraulically operated wet disc clutch
BrakesPedal operated hydraulic disc brake acting on differential side shafts
SteeringHydraulic front and electro-hydraulic rear steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case 4890”

How much does a 4890 weigh?

A 4890 weighs 25,750 lb (11,680 kg) unladen.

Weights & dimensions — 4890 weights and dimensions
Unladen weight25,750 lb · 11,680 kg
Wheelbase110.0 in · 2,794 mm
Length243.0 in · 6,172 mm
Width99.0 in · 2,515 mm
Ground clearance18.0 in · 457 mm
Front track76.0–140.0 in · 1,930–3,556 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track76.0–140.0 in · 1,930–3,556 mmWikibooks gives one track for both axles; the article lists alternatives

Source · Traktorenlexikon, “Case 4890”

Which tractors compare with a 4890?

Within 10% of its 253.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 4890 two-wheel drive or four-wheel drive?

The J.I. Case 4890 is four-wheel drive (4WD).

What PTO does a 4890 have?

A 4890 has a independent 1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 4890”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 4890CC BY-SA 4.0, WIKIBOOKS-TL-115413 · revision 989879. Wikibooks contributors (Traktorenlexikon). Original document