- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1960–1969
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
J.I. Case 430 Full specifications
CASE G-188 D four-cylinder diesel. The manufacturer claimed 35.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
35.0 hp
26.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 430”, claimed
- Weight
- 3,124 lb
- Hyd. flow
- 8.5 gpm
- Top speed
- 12.4–21.7 mph
J.I. Case 430 specs: key facts
The J.I. Case 430 was built from 1960 to 1969.
The J.I. Case 430 has a claimed engine power (gross or net not stated) of 26.1 kW (35.0 hp); it has no measured PTO figure.
The J.I. Case 430 is two-wheel drive (2WD).
The J.I. Case 430 has a CASE G-188 D engine, a 4-cylinder 3.09 L diesel unit.Source 2
The J.I. Case 430 weighs 1,417 kg (3,124 lb) unladen.
The J.I. Case 430 has a rear PTO running at 540 rpm.
The hydraulic pump of the J.I. Case 430 delivers 32.2 L/min (8.5 gpm).
Source · Traktorenlexikon, “Case 430”
How much horsepower does a 430 have?
The only figure for the 430 is 35.0 hp (26.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 430”
What engine is in a 430?
A 430 has a CASE G-188 D, a 4-cylinder 3.09 L diesel engine.
| Make & model | CASE G-188 D |
|---|---|
| Cylinders | 4, liquid-cooledSource 1 |
| Displacement | 188.4 ci · 3.09 L |
| Electrical system | 12 VSource 1 |
Source · Traktorenlexikon, “Case 431”
How much will a 430 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 430 are below.
| Pump flow | 8.5 gpm · 32.2 L/min |
|---|---|
| Hitch category | Category 1 |
| Rear PTO | 540 rpm |
Source · Traktorenlexikon, “Case 430”
What transmission does a 430 have?
Transmission specifications for the 430 are below.
| Steering | Mechanical worm gear steering with hydraulic power steering assistance |
|---|---|
| Top speed | 12.4–21.7 mph · 20–35 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Case 430”
How much does a 430 weigh?
A 430 weighs 3,124 lb (1,417 kg) unladen.
| Unladen weight | 3,124 lb · 1,417 kg |
|---|---|
| Wheelbase | 75.2 in · 1,911 mm |
| Length | 130.2 in · 3,307 mm |
| Width | 61.4 in · 1,559 mm |
| Height | 50.5 in · 1,283 mm |
| Ground clearance | 13.8 in · 350 mm |
| Front track | 47.5 in · 1,207 mm |
| Rear track | 48.0–76.0 in · 1,219–1,930 mm |
| Turning radius, braked | 7.9 ft · 2.41 m |
Source · Traktorenlexikon, “Case 430”
Which tractors compare with a 430?
Within 10% of its 33.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 43133.5 hp PTO, claimed · 1960–1969Side by side with the 430 →
- Renault Super 5-D (A)33.4 hp PTO, claimed · 1965–1967Side by side with the 430 →
- Massey-Harris-Ferguson FE 35 Spezial33.8 hp PTO, claimed · 1956–1960Side by side with the 430 →
- J.I. Case 47033.9 hp PTO, claimed · 1969–1973Side by side with the 430 →
- Nuffield PM-433.9 hp PTO, claimed · 1951–1957Side by side with the 430 →
- IMT 54033.1 hp PTO, claimed · 1975–1986Side by side with the 430 →
Everything else people ask
Is a 430 two-wheel drive or four-wheel drive?
The J.I. Case 430 is two-wheel drive (2WD).
What PTO does a 430 have?
A 430 has a 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 431”; and Traktorenlexikon, “Case 430”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 430 — CC BY-SA 4.0, WIKIBOOKS-TL-115280 · revision 986981. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case 431 — CC BY-SA 4.0, WIKIBOOKS-TL-115278 · revision 989834. Wikibooks contributors (Traktorenlexikon). Original document