- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1958–1959
- 798 built
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
J.I. Case 410-B Full specifications
The manufacturer claimed 36.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
36.5 hp
27.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 410-B”, claimed
- Weight
- 3,135 lb
- Hyd. flow
- 3.0 gpm
- Top speed
- 12.4 mph
J.I. Case 410-B specs: key facts
The J.I. Case 410-B was built from 1958 to 1959.
The J.I. Case 410-B has a claimed engine power (gross or net not stated) of 27.2 kW (36.5 hp); it has no measured PTO figure.
The J.I. Case 410-B is two-wheel drive (2WD).
The J.I. Case 410-B weighs 1,422 kg (3,135 lb) unladen.
The J.I. Case 410-B has a dependent rear PTO running at 540 rpm.
The hydraulic pump of the J.I. Case 410-B delivers 11.4 L/min (3.0 gpm).
Source · Traktorenlexikon, “Case 410-B”
How much horsepower does a 410-B have?
The only figure for the 410-B is 36.5 hp (27.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 410-B”
How much will a 410-B lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 410-B are below.
| Pump flow | 3.0 gpm · 11.4 L/min |
|---|---|
| Rear PTO | Dependent, transmission-driven, 540 rpm @ 1,970 engine rpm |
Source · Traktorenlexikon, “Case 410-B”
What transmission does a 410-B have?
Transmission specifications for the 410-B are below.
| Steering | Mechanical worm gear steering with hydraulic power assist |
|---|---|
| Top speed | 12.4 mph · 20 km/h |
Source · Traktorenlexikon, “Case 410-B”
How much does a 410-B weigh?
A 410-B weighs 3,135 lb (1,422 kg) unladen.
| Unladen weight | 3,135 lb · 1,422 kg |
|---|---|
| Wheelbase | 75.2 in · 1,911 mm |
| Length | 130.7 in · 3,321 mm |
| Width | 61.7 in · 1,567 mm |
| Height | 55.5 in · 1,410 mm |
| Front track | 47.5 in · 1,207 mm |
| Rear track | 48.0–68.0 in · 1,219–1,727 mm |
Source · Traktorenlexikon, “Case 410-B”
Which tractors compare with a 410-B?
Within 10% of its 36.61 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 411-B36.61 hp PTO, claimed · 1958–1960Side by side with the 410-B →
- David Brown 950 (Implematic)36.7 hp PTO, claimed · 1958–1962Side by side with the 410-B →
- OLIVER 60036.7 hp PTO, claimed · 1962–1964Side by side with the 410-B →
- J.I. Case 310-B36.5 hp PTO, claimed · 1958–1959Side by side with the 410-B →
- J.I. Case 311-B36.5 hp PTO, claimed · 1958–1959Side by side with the 410-B →
- J.I. Case 53136.5 hp PTO, claimed · 1960–1969Side by side with the 410-B →
Everything else people ask
Is a 410-B two-wheel drive or four-wheel drive?
The J.I. Case 410-B is two-wheel drive (2WD).
What PTO does a 410-B have?
A 410-B has a dependent 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 410-B”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 410-B — CC BY-SA 4.0, WIKIBOOKS-TL-115259 · revision 989820. Wikibooks contributors (Traktorenlexikon). Original document