- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1958–1960
- 5,421 built
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
J.I. Case 411-B Full specifications
The manufacturer claimed 36.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
36.5 hp
27.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 411-B”, claimed
- Weight
- 4,350 lb
- Hyd. flow
- 3.0 gpm
- Top speed
- 12.4 mph
J.I. Case 411-B specs: key facts
The J.I. Case 411-B was built from 1958 to 1960.
The J.I. Case 411-B has a claimed engine power (gross or net not stated) of 27.2 kW (36.5 hp); it has no measured PTO figure.
The J.I. Case 411-B is two-wheel drive (2WD).
The J.I. Case 411-B weighs 1,973 kg (4,350 lb) unladen.
The J.I. Case 411-B has a dependent rear PTO running at 540 rpm.
The hydraulic pump of the J.I. Case 411-B delivers 11.4 L/min (3.0 gpm).
Source · Traktorenlexikon, “Case 411-B”
How much horsepower does a 411-B have?
The only figure for the 411-B is 36.5 hp (27.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 411-B”
How much will a 411-B lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 411-B are below.
| Pump flow | 3.0 gpm · 11.4 L/min |
|---|---|
| Rear PTO | Dependent, transmission-driven, 540 rpm @ 1,970 engine rpm |
Source · Traktorenlexikon, “Case 411-B”
What transmission does a 411-B have?
Transmission specifications for the 411-B are below.
| Steering | Mechanical worm gear steering with hydraulic power assist |
|---|---|
| Top speed | 12.4 mph · 20 km/h |
Source · Traktorenlexikon, “Case 411-B”
How much does a 411-B weigh?
A 411-B weighs 4,350 lb (1,973 kg) unladen.
| Unladen weight | 4,350 lb · 1,973 kg |
|---|---|
| Wheelbase | 84.5 in · 2,146 mmGP: 2,019 |
| Length | 130.0 in · 3,302 mmGP: 3,235 |
| Width | 79.6 in · 2,022 mm |
| Height | 61.0 in · 1,549 mm |
| Ground clearance | 20.9 in · 530 mm |
| Rear track | 48.0–88.0 in · 1,219–2,235 mm |
| Turning radius, braked | 7.8 ft · 2.39 m |
Source · Traktorenlexikon, “Case 411-B”
Which tractors compare with a 411-B?
Within 10% of its 36.61 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 410-B36.61 hp PTO, claimed · 1958–1959Side by side with the 411-B →
- David Brown 950 (Implematic)36.7 hp PTO, claimed · 1958–1962Side by side with the 411-B →
- OLIVER 60036.7 hp PTO, claimed · 1962–1964Side by side with the 411-B →
- J.I. Case 310-B36.5 hp PTO, claimed · 1958–1959Side by side with the 411-B →
- J.I. Case 311-B36.5 hp PTO, claimed · 1958–1959Side by side with the 411-B →
- J.I. Case 53136.5 hp PTO, claimed · 1960–1969Side by side with the 411-B →
Everything else people ask
Is a 411-B two-wheel drive or four-wheel drive?
The J.I. Case 411-B is two-wheel drive (2WD).
What PTO does a 411-B have?
A 411-B has a dependent 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 411-B”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 411-B — CC BY-SA 4.0, WIKIBOOKS-TL-115258 · revision 989821. Wikibooks contributors (Traktorenlexikon). Original document