4 material differences · fewer than 12

Tractor oneJ.I. Case 410-B1958–1959No measured PTO figureTractor twoOLIVER 6001962–1964No measured PTO figure

Which should you choose?

Read our verdict on the 410-B and the 600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

4 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 410-B and OLIVER 600, field by field
Field410-B600Gap
Engine
Engine power, claimed claimed36.5 hp42.4 hp+16% 600
Engine declared—DAVID BROWN AD 4/40 T 489—
Displacement declared—2.71 L—
Maximum torque declared—133 lb·ft · 181 N·m—
Transmission
Top speed declared12.4 mph · 20 km/h12.4 mph · 20 km/h—
Clutch declared—pedal-operated dry Borg & Beck single-plate clutch—
Hydraulics & hitch
Pump flow declared3.0 gpm · 11.4 L/min7.4 gpm · 28.0 L/min+146% 600
Rear PTO speeds declared540 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared3,135 lb · 1,422 kg4,189 lb · 1,900 kg+34% 600
Wheelbase declared75.2 in · 1,911 mm76.7 in · 1,948 mm—
Length declared130.7 in · 3,321 mm118.0 in · 2,997 mm+11% 410-B
Width declared61.7 in · 1,567 mm64.0 in · 1,626 mm—
Ground clearance declared—15.7 in · 400 mm—
Turning radius, braked declared—10.1 ft · 3.08 m—
Fuel tank declared55.2 qt · 52.2 L55.2 qt · 52.2 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 410-B sources

Source
  • Source: Traktorenlexikon, “Case 410-B”

OLIVER 600 sources

Source
  • Source: Traktorenlexikon, “Oliver 600”