• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1984–1985

It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 3294 Full specifications

CASE 504 BDT six-cylinder diesel. The manufacturer claimed 194.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

194.3 hp

144.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 3294”, claimed

Weight
17,915 lb
Hyd. flow
23.0 gpm
Top speed
18.6 mph

J.I. Case 3294 specs: key facts

  • The J.I. Case 3294 was built from 1984 to 1985.

  • The J.I. Case 3294 has a claimed engine power (gross or net not stated) of 144.9 kW (194.3 hp); it has no measured PTO figure.

  • The J.I. Case 3294 is four-wheel drive (4WD).

  • The J.I. Case 3294 has a CASE 504 BDT engine, a 6-cylinder 8.26 L diesel unit.Source 1

  • The J.I. Case 3294 weighs 8,126 kg (17,915 lb) unladen.

  • The J.I. Case 3294 has an independent rear PTO running at 1000 rpm.

  • The hydraulic pump of the J.I. Case 3294 delivers 87.1 L/min (23.0 gpm).

Source · Traktorenlexikon, “Case 3294”

How much horsepower does a 3294 have?

The only figure for the 3294 is 194.3 hp (144.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
194.3 hp

Source · Traktorenlexikon, “Case 3294”

What engine is in a 3294?

A 3294 has a CASE 504 BDT, a 6-cylinder 8.26 L diesel engine.

Engine — 3294 engine specifications
Make & modelCASE 504 BDT
Cylinders6, liquid-cooledSource 2
Displacement504.2 ci · 8.26 L

Source · Traktorenlexikon, “Case 2290”

How much will a 3294 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 3294 are below.

Hydraulics & PTO — 3294 hydraulics and PTO specifications
Pump flow23.0 gpm · 87.1 L/min
Hitch categoryCategory 3
Rear PTOIndependent, engine-driven, 1000 rpm
PTO shaft1 3/8" splines Form-1

Source · Traktorenlexikon, “Case 3294”

What transmission does a 3294 have?

Transmission specifications for the 3294 are below.

Transmission — 3294 transmission specifications
SteeringHydrostatic steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case 3294”

How much does a 3294 weigh?

A 3294 weighs 17,915 lb (8,126 kg) unladen.

Weights & dimensions — 3294 weights and dimensions
Unladen weight17,915 lb · 8,126 kg
Wheelbase104.0 in · 2,642 mm
Length182.0 in · 4,623 mm
Width96.0 in · 2,438 mm
Height116.9 in · 2,970 mm
Ground clearance22.5 in · 572 mm
Front track75.4–91.1 in · 1,915–2,314 mm
Rear track64.0–88.0 in · 1,626–2,235 mm
Turning radius, braked14.8 ft · 4.52 m

Source · Traktorenlexikon, “Case 3294”

Which tractors compare with a 3294?

Within 10% of its 162.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 3294 two-wheel drive or four-wheel drive?

The J.I. Case 3294 is four-wheel drive (4WD).

What PTO does a 3294 have?

A 3294 has a independent 1000 rpm rear PTO on a 1 3/8" splines Form-1 shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Case 2290”; and Traktorenlexikon, “Case 3294”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 2290CC BY-SA 4.0, WIKIBOOKS-TL-115392 · revision 989874. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Case 3294CC BY-SA 4.0, WIKIBOOKS-TL-115448 · revision 989890. Wikibooks contributors (Traktorenlexikon). Original document