10 material differences · fewer than 12

Tractor oneJ.I. Case 32941984–1985No measured PTO figureTractor twoJohn Deere 81101999–2002No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1984–1985; 1999–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 3 fields identical or within 5%, which is not counted as material

J.I. Case 3294 and John Deere 8110, field by field
Field32948110Gap
Engine
Engine power, claimed claimed194.3 hp192.4 hp—
Engine declaredCASE 504 BDTJohn Deere-PowerTech 6.081 HRW-11differs
Displacement declared8.26 L8.13 L—
Maximum torque declared—586 lb·ft · 794 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declared—Pedal operated hydraulic wet John Deere multi-disc clutch—
Hydraulics & hitch
Hydraulic centre declared—Closed centre—
Hydraulic control declared—Load sensing—
Pump flow declared23.0 gpm · 87.1 L/min31.8 gpm · 120.4 L/min+38% 8110
Pressure declared—2,683 psi · 185 bar—
Rear PTO speeds declared1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared17,915 lb · 8,126 kg19,346 lb · 8,775 kg+8% 8110
Maximum permissible mass declared—30,865 lb · 14,000 kg—
Wheelbase declared104.0 in · 2,642 mm116.1 in · 2,950 mm+12% 8110
Length declared182.0 in · 4,623 mm216.0 in · 5,487 mm+19% 8110
Width declared96.0 in · 2,438 mm118.6–127.3 in · 3,012–3,233 mmdiffers
Height, over the cab declared116.9 in · 2,970 mm121.7 in · 3,090 mm—
Ground clearance declared22.5 in · 572 mm16.5 in · 420 mm+36% 3294
Turning radius, braked declared14.8 ft · 4.52 m——
Fuel tank declared259.9 qt · 246.0 L540.0 qt · 511.0 L+108% 8110

J.I. Case 3294 sources

Source
  • Source: Traktorenlexikon, “Case 3294”
  • Source: Traktorenlexikon, “Case 2290”

John Deere 8110 sources

Source
  • Source: Traktorenlexikon, “John Deere 8110”
  • Source: OECD test report 1931, 2000