• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1972–1978
  • 8,372 built

It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 1175 Full specifications

CASE A-451 T six-cylinder diesel. The manufacturer claimed 121.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

121.9 hp

90.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 1175”, claimed

Weight
10,199 lb
Hyd. flow
16.0 gpm
Top speed
15.5 mph

J.I. Case 1175 specs: key facts

  • The J.I. Case 1175 was built from 1972 to 1978.

  • The J.I. Case 1175 has a claimed engine power (gross or net not stated) of 90.9 kW (121.9 hp); it has no measured PTO figure.

  • The J.I. Case 1175 is two-wheel drive (2WD).

  • The J.I. Case 1175 has a CASE A-451 T engine, a 6-cylinder 7.39 L diesel unit.Source 1

  • The J.I. Case 1175 weighs 4,626 kg (10,199 lb) unladen.

  • The J.I. Case 1175 has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the J.I. Case 1175 delivers 60.6 L/min (16.0 gpm).

Source · Traktorenlexikon, “Case 1175”

How much horsepower does an 1175 have?

The only figure for the 1175 is 121.9 hp (90.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
121.9 hp

Source · Traktorenlexikon, “Case 1175”

What engine is in an 1175?

An 1175 has a CASE A-451 T, a 6-cylinder 7.39 L diesel engine.

Engine — 1175 engine specifications
Make & modelCASE A-451 T
Cylinders6, liquid-cooledSource 2
Displacement451.0 ci · 7.39 L
Max torque384 lb·ft · 520 N·m @ 1,500 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Case 1170”

How much will an 1175 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 1175 are below.

Hydraulics & PTO — 1175 hydraulics and PTO specifications
Pump flow16.0 gpm · 60.6 L/min
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,100 engine rpm

Source · Traktorenlexikon, “Case 1175”

What transmission does an 1175 have?

Transmission specifications for the 1175 are below.

Transmission — 1175 transmission specifications
BrakesPedal-operated hydraulic double disc brake acting on differential side shafts
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Case 1175”

How much does an 1175 weigh?

An 1175 weighs 10,199 lb (4,626 kg) unladen.

Weights & dimensions — 1175 weights and dimensions
Unladen weight10,199 lb · 4,626 kg
Wheelbase108.0 in · 2,743 mm
Length172.0 in · 4,370 mm
Width88.0 in · 2,235 mm
Height116.1 in · 2,950 mm
Ground clearance22.2 in · 565 mm
Front track62.0–88.0 in · 1,575–2,235 mm
Rear track64.0–108.0 in · 1,626–2,743 mm
Turning radius, braked12.8 ft · 3.91 m

Source · Traktorenlexikon, “Case 1175”

Which tractors compare with an 1175?

Within 10% of its 118.2 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is an 1175 two-wheel drive or four-wheel drive?

The J.I. Case 1175 is two-wheel drive (2WD).

What PTO does an 1175 have?

An 1175 has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 1170”; and Traktorenlexikon, “Case 1175”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 1170CC BY-SA 4.0, WIKIBOOKS-TL-115346 · revision 972390. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Case 1175CC BY-SA 4.0, WIKIBOOKS-TL-115347 · revision 989865. Wikibooks contributors (Traktorenlexikon). Original document