2 material differences · fewer than 12

Tractor oneJ.I. Case 11701970–1972No measured PTO figureTractor twoJ.I. Case 11751972–1978No measured PTO figure

Which should you choose?

Read our verdict on the 1170 and the 1175 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

2 material differences · 12 fields identical or within 5%, which is not counted as material

J.I. Case 1170 and J.I. Case 1175, field by field
Field	1170	1175	Gap
Engine
Engine power, claimed claimed	121.9 hp	121.9 hp	—
Engine declared	CASE A-451 T	CASE A-451 T	—
Displacement declared	7.39 L	7.39 L	—
Maximum torque declared	384 lb·ft · 520 N·m	384 lb·ft · 520 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5 mph · 25 km/h	differs
Hydraulics & hitch
Pump flow declared	16.0 gpm · 60.6 L/min	16.0 gpm · 60.6 L/min	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,541 lb · 6,142 kg	10,199 lb · 4,626 kg	+33% 1170
Wheelbase declared	108.0 in · 2,743 mm	108.0 in · 2,743 mm	—
Length declared	172.0 in · 4,370 mm	172.0 in · 4,370 mm	—
Width declared	88.0 in · 2,235 mm	88.0 in · 2,235 mm	—
Ground clearance declared	22.2 in · 565 mm	22.2 in · 565 mm	—
Turning radius, braked declared	12.8 ft · 3.91 m	12.8 ft · 3.91 m	—
Fuel tank declared	200.0 qt · 189.3 L	200.0 qt · 189.3 L	—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 1170 sources

Source

Source: Traktorenlexikon, “Case 1170”

J.I. Case 1175 sources