- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1977–1981
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 484 specs: hp, weight, years
INTERNATIONAL-HARVESTER D-179 three-cylinder diesel. The manufacturer claimed 49.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
49.3 hp
36.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC 484”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 5,137 lb
- Hyd. flow
- 8.8 gpm
- Top speed
- 15.5 mph
International Harvester 484 specs: key facts
The International Harvester 484 was built from 1977 to 1981.
The International Harvester 484 has a claimed engine power (gross or net not stated) of 36.8 kW (49.3 hp); it has no measured PTO figure.
The International Harvester 484 is two-wheel drive (2WD).
The International Harvester 484 has a INTERNATIONAL-HARVESTER D-179 engine, a 3-cylinder 2.93 L diesel unit.Source 2
The International Harvester 484 weighs 2,330 kg (5,137 lb) unladen.
The International Harvester 484 has an independent rear PTO running at 540/1000 rpm.
The hydraulic pump of the International Harvester 484 delivers 33.3 L/min (8.8 gpm).
Source · Traktorenlexikon, “IHC 484”
How much horsepower does a 484 have?
The only figure for the 484 is 49.3 hp (36.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC 484”
What engine is in a 484?
A 484 has an INTERNATIONAL-HARVESTER D-179, a 3-cylinder 2.93 L diesel engine.
| Make & model | INTERNATIONAL-HARVESTER D-179Source 2 |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 179.0 ci · 2.93 LSource 2 |
| Max torque | 120 lb·ft · 163 N·m @ 1,460 rpm |
| Injection | Direct injection method with hanging valves and Rotocap system |
| Electrical system | 12 V |
Source · Traktorenlexikon, “IHC 484”
How much will a 484 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 484 are below.
| Pump flow | 8.8 gpm · 33.3 L/min |
|---|---|
| Rear PTO | Independent, 540/1000 rpm @ 1,936 engine rpm |
Source · Traktorenlexikon, “IHC 484”
What transmission does a 484 have?
Transmission specifications for the 484 are below.
| Clutch | Pedal-operated dry Laycock single-disc clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “IHC 484”
How much does a 484 weigh?
A 484 weighs 5,137 lb (2,330 kg) unladen.
| Unladen weight | 5,137 lb · 2,330 kg |
|---|---|
| Wheelbase | 79.0 in · 2,007 mm |
| Length | 134.3 in · 3,411 mm |
| Width | 105.5 in · 2,680 mm |
| Height | 96.4 in · 2,449 mm |
| Ground clearance | 10.8 in · 275 mm |
| Front track | 52.0–80.0 in · 1,321–2,033 mm |
| Rear track | 52.0–76.0 in · 1,321–1,930 mm |
| Turning radius, braked | 11.1 ft · 3.37 m |
Source · Traktorenlexikon, “IHC 484”
What oil does a 484 take, and how much?
A 484 engine takes 6.9 qt (6.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 6.9 qt · 6.5 LSource: Traktorenlexikon, “IHC 484” · single source, not independently verified |
| Transmission | 35.9 qt · 34.0 LSource: Traktorenlexikon, “IHC 484” · single source, not independently verified |
| Hydraulic | 36.0 qt · 34.1 LSource: Traktorenlexikon, “IHC 484” · single source, not independently verified |
| Cooling system | 11.8 qt · 11.2 LSource: Traktorenlexikon, “IHC 484” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 484?
Within 10% of its 40.4 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- VALMET 50240 hp PTO, claimed · 1971–1982Side by side with the 484 →
- Fiat 500 (DT)40.46 hp PTO, claimed · 1971–1973Side by side with the 484 →
- Fiat 500E40.46 hp PTO, claimed · 1971–1973Side by side with the 484 →
- SOMECA 500 (TD)40.46 hp PTO, claimed · 1971–1973Side by side with the 484 →
- SOMECA 500E40.46 hp PTO, claimed · 1971–1973Side by side with the 484 →
- Fiat 480-8 (DT)40.3 hp PTO, claimed · 1981–1982Side by side with the 484 →
Common questions about the International Harvester 484
Is a 484 two-wheel drive or four-wheel drive?
The International Harvester 484 is two-wheel drive (2WD).
What PTO does a 484 have?
A 484 has a independent 540/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “McCormick 523”; and Traktorenlexikon, “IHC 484”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 484 — CC BY-SA 4.0, WIKIBOOKS-TL-118595 · revision 1030553. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick 523 — CC BY-SA 4.0, WIKIBOOKS-TL-118107 · revision 1059859. Wikibooks contributors (Traktorenlexikon). Original document