Fiat 500 (DT) vs International Harvester 484

12 material differences

Tractor one

1971–1973

No measured PTO figure

Tractor two

1977–1981

No measured PTO figure

Which should you choose?

Read our verdict on the 500 (DT) and the 484 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 500 (DT) and International Harvester 484, field by field
Field	500 (DT)	484	Gap
Engine
Engine power, claimed claimed	49.3 hp	49.3 hp	—
Engine declared	FIAT-IVECO 8035.02.202	INTERNATIONAL-HARVESTER D-179	differs
Displacement declared	2.59 L	2.93 L	+13% 484
Maximum torque declared	118 lb·ft · 160 N·m	120 lb·ft · 163 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	pedal-operated two-stage dry FERODO double clutch	Pedal-operated dry Laycock single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	8.8 gpm · 33.3 L/min	+53% 484
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	3,571 lb · 1,620 kg	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,023 lb · 1,825 kg	5,137 lb · 2,330 kg	+28% 484
Wheelbase declared	75.6 in · 1,920 mm	79.0 in · 2,007 mm	—
Length declared	119.1 in · 3,025 mm	134.3 in · 3,411 mm	+13% 484
Width declared	62.4 in · 1,585 mm	105.5 in · 2,680 mm	+69% 484
Height declared	67.9 in · 1,725 mm	96.4 in · 2,449 mm	+42% 484
Ground clearance declared	15.0 in · 380 mm	10.8 in · 275 mm	+38% 500 (DT)
Turning radius, braked declared	9.7 ft · 2.95 m	11.1 ft · 3.37 m	+14% 484
Fuel tank declared	57.1 qt · 54.0 L	81.4 qt · 77.0 L	+43% 484

Source

Source