• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1958–1961
  • 10,329 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

International Harvester 240 Utility specs: hp, weight, years

INTERNATIONAL HARVESTER C-123 four-cylinder petrol. The manufacturer claimed 31.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

31.5 hp

23.5 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC 240”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,638 lb
Hyd. flow
6.0 gpm
Top speed
14.3 mph

International Harvester 240 Utility specs: key facts

  • The International Harvester 240 Utility was built from 1958 to 1961.

  • The International Harvester 240 Utility has a claimed engine power (gross or net not stated) of 23.5 kW (31.5 hp); it has no measured PTO figure.

  • The International Harvester 240 Utility is two-wheel drive (2WD).

  • The International Harvester 240 Utility has a INTERNATIONAL HARVESTER C-123 engine, a 4-cylinder 2.01 L petrol unit.Source 2

  • The International Harvester 240 Utility weighs 1,650 kg (3,638 lb) unladen.

  • The International Harvester 240 Utility has a dependent rear PTO running at 540 rpm.

  • The hydraulic pump of the International Harvester 240 Utility delivers 22.8 L/min (6.0 gpm).

Source · Traktorenlexikon, “IHC 240”

How does the 240 Utility compare with its class?

  • Limitation:

    Four forward gears is low for its class — 33% below the median of 6 across the 169 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 169 comparable records. How we work this out

Illustration of the 1958–1961 International Harvester 240 Utility, a 32 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a 240 Utility have?

The only figure for the 240 Utility is 31.5 hp (23.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
31.5 hp

Source · Traktorenlexikon, “IHC 240”

What engine is in a 240 Utility?

A 240 Utility has an INTERNATIONAL HARVESTER C-123, a 4-cylinder 2.01 L petrol engine.

Engine — 240 Utility engine specifications
Make & modelINTERNATIONAL HARVESTER C-123Source 2
Cylinders4, liquid-cooledSource 2
Displacement122.7 ci · 2.01 LSource 2
Max torque101 lb·ft · 137 N·m @ 1,200 rpm
Electrical system6 V

Source · Traktorenlexikon, “IHC 240”

How much will a 240 Utility lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 240 Utility are below.

Hydraulics & PTO — 240 Utility hydraulics and PTO specifications
Pump flow6.0 gpm · 22.8 L/min
Rear PTODependent, transmission-driven, 540 rpm @ 1,650 engine rpm
PTO shaft1 1/8"- 6 splines

Source · Traktorenlexikon, “IHC 240”

What transmission does a 240 Utility have?

Transmission specifications for the 240 Utility are below.

Transmission — 240 Utility transmission specifications
ClutchPedal-operated dry Rockford single-plate clutch
BrakesPedal-operated disc brakes acting on differential side shafts
SteeringMechanical gear steering
Top speed14.3 mph · 23 km/h

Source · Traktorenlexikon, “IHC 240”

How much does a 240 Utility weigh?

A 240 Utility weighs 3,638 lb (1,650 kg) unladen.

Weights & dimensions — 240 Utility weights and dimensions
Unladen weight3,638 lb · 1,650 kg
Wheelbase75.0 in · 1,905 mm
Length116.0 in · 2,946 mm
Width63.0 in · 1,600 mm
Height58.0 in · 1,473 mm
Ground clearance17.0 in · 432 mm
Front track48.0–76.0 in · 1,219–1,930 mmWikibooks gives one track for both axles
Rear track48.0–76.0 in · 1,219–1,930 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “IHC 240”

What oil does a 240 Utility take, and how much?

A 240 Utility engine takes 5.0 qt (4.7 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

240 Utility fluid capacities, grades and service intervals
SystemCapacity
Engine oil5.0 qt · 4.7 LSource: Traktorenlexikon, “IHC 240” · single source, not independently verified
Transmission5.0 qt · 4.7 LSource: Traktorenlexikon, “IHC 240” · single source, not independently verified
Hydraulic13.5 qt · 12.8 LSource: Traktorenlexikon, “IHC 240” · single source, not independently verified
Cooling system15.0 qt · 14.2 LSource: Traktorenlexikon, “IHC 240” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 240 Utility?

Within 10% of its 31.5 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the International Harvester 240 Utility

Is a 240 Utility two-wheel drive or four-wheel drive?

The International Harvester 240 Utility is two-wheel drive (2WD).

What PTO does a 240 Utility have?

A 240 Utility has a dependent 540 rpm rear PTO on a 1 1/8"- 6 splines shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “McCormick Farmall Super-A 1”; and Traktorenlexikon, “IHC 240”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IHC 240 — CC BY-SA 4.0, WIKIBOOKS-TL-118708 · revision 1032288. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: McCormick Farmall Super-A 1 — CC BY-SA 4.0, WIKIBOOKS-TL-117767 · revision 1019080. Wikibooks contributors (Traktorenlexikon). Original document